All MIBs › CTATX-MIB › sprotoIpxDot3Framing
sprotoIpxDot3Framing
Module: CTATX-MIB
OID (symbolic): CTATX-MIB::sprotoIpxDot3Framing
OID (numeric): 1.3.6.1.4.1.97.3.17.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: If sprotoIpxRoute or sprotoIpxTranslate is enabled, specifies the type of framing to be used for NetWare IPX packets on 802.3 networks. ethernet8023(1) speci- fies that the 802.3 header is to be used without an 802.2 header. ethernet2(2) specifies that Ethernet-2 framing is to be used, with etherType 8137. ether- net8022(3) specifies that an LLC header e0,e0,03 is to be used in conjunction with the 802.3 header.
What is sprotoIpxDot3Framing?
This read-write enumerated INTEGER, relevant when sprotoIpxRoute or sprotoIpxTranslate is enabled, selects the 802.3 framing used for NetWare IPX packets: raw 802.3 without an 802.2 header, Ethernet-2 framing with etherType 8137, or 802.2 framing with an e0-e0-03 LLC header. An admin sets this to match the IPX frame type expected by the NetWare servers and clients on that segment, since NetWare frame type mismatches prevent communication entirely. Setting sprotoIpxDot3Framing to ethernet8022(3) would be required to interoperate with a NetWare 4.x environment defaulting to 802.2 framing rather than the older raw 802.3 type.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.97.3.17.2 snmpwalk -v2c -c public <target> CTATX-MIB::sprotoIpxDot3Framing
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.97.3.17.2.1 snmpget -v2c -c public <target> CTATX-MIB::sprotoIpxDot3Framing.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.97.3.17.2.1 i <value>
Start monitoring Cabletron/Enterasys ATX switch module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTATX-MIB::sprotoIpxDot3Framing OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys ATX switch module from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.97 | sigma | CT-ELS10-27-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.97.3 | ecs_1 | CTATX-MIB |
| 1.3.6.1.4.1.97.3.17 | sproto | CTATX-MIB |
| 1.3.6.1.4.1.97.3.17.2 | sprotoIpxDot3Framing | CTATX-MIB |