CTATX-MIB :: smirrorStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCTATX-MIBsmirrorStatus

smirrorStatus

Module: CTATX-MIB

OID (symbolic): CTATX-MIB::smirrorStatus

OID (numeric): 1.3.6.1.4.1.97.3.30.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: invalid(1) to turn off port mirroring. local(2) to mirror either to a local port or to a remote ATX. remote(3) to mirror traffics from a remote ATX to a local port.

What is smirrorStatus?

This setting controls the port mirroring mode: invalid to turn mirroring off, local to mirror to a port on the same ATX, or remote to mirror traffic from a remote ATX to a local port. It's the master switch an admin uses to decide whether and how traffic copies are captured for analysis. An admin wanting to capture traffic from a remote switch onto a local sniffer port would set smirrorStatus to remote.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.97.3.30.1
snmpwalk -v2c -c public <target> CTATX-MIB::smirrorStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.97.3.30.1.1
snmpget -v2c -c public <target> CTATX-MIB::smirrorStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.97.3.30.1.1 i <value>

Start monitoring Cabletron/Enterasys ATX switch module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTATX-MIB::smirrorStatus OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys ATX switch module from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.97sigmaCT-ELS10-27-MIB
Numeric OIDNameModule
1.3.6.1.4.1.97.3ecs_1CTATX-MIB
1.3.6.1.4.1.97.3.30smirrorCTATX-MIB
1.3.6.1.4.1.97.3.30.1smirrorStatusCTATX-MIB