All MIBs › CTATX-MIB › smirrorDiagPort
smirrorDiagPort
Module: CTATX-MIB
OID (symbolic): CTATX-MIB::smirrorDiagPort
OID (numeric): 1.3.6.1.4.1.97.3.30.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This entry defines the diagnostic port to output mirrored packets. It can be one of the Ethernet, Token Ring or FDDI interfaces in the ATX.
What is smirrorDiagPort?
This defines the diagnostic port that mirrored packets are sent out on, which can be an Ethernet, Token Ring, or FDDI interface on the ATX. It's where the admin plugs in a protocol analyzer to see copies of the traffic being mirrored. An admin troubleshooting a specific segment would connect a sniffer to the port configured in smirrorDiagPort to capture the mirrored packets.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.97.3.30.2 snmpwalk -v2c -c public <target> CTATX-MIB::smirrorDiagPort
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.97.3.30.2.1 snmpget -v2c -c public <target> CTATX-MIB::smirrorDiagPort.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.97.3.30.2.1 i <value>
Start monitoring Cabletron/Enterasys ATX switch module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTATX-MIB::smirrorDiagPort OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys ATX switch module from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.97 | sigma | CT-ELS10-27-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.97.3 | ecs_1 | CTATX-MIB |
| 1.3.6.1.4.1.97.3.30 | smirror | CTATX-MIB |
| 1.3.6.1.4.1.97.3.30.2 | smirrorDiagPort | CTATX-MIB |