CTATX-MIB :: sipcktState

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCTATX-MIBsipcktState

sipcktState

Module: CTATX-MIB

OID (symbolic): CTATX-MIB::sipcktState

OID (numeric): 1.3.6.1.4.1.97.3.21.1.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The status of this binding.

What is sipcktState?

This value reports the validity state of the IP-to-circuit binding, one of valid, invalid, invalid-all, or netmask-conflict. A state other than valid warns an admin that the configured IP address/netmask on that circuit is broken, so traffic on that interface may not route correctly. For instance, if two ports are accidentally configured with overlapping subnets, sipcktState may report netmask-conflict for one of them.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.97.3.21.1.1.3
snmpwalk -v2c -c public <target> CTATX-MIB::sipcktState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.97.3.21.1.1.3.1
snmpget -v2c -c public <target> CTATX-MIB::sipcktState.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.97.3.21.1.1.3.1 i <value>

Start monitoring Cabletron/Enterasys ATX switch module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTATX-MIB::sipcktState OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys ATX switch module from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.97sigmaCT-ELS10-27-MIB
Numeric OIDNameModule
1.3.6.1.4.1.97.3ecs_1CTATX-MIB
1.3.6.1.4.1.97.3.21sipcktCTATX-MIB
1.3.6.1.4.1.97.3.21.1sipcktTableCTATX-MIB
1.3.6.1.4.1.97.3.21.1.1sipcktEntryCTATX-MIB
1.3.6.1.4.1.97.3.21.1.1.3sipcktStateCTATX-MIB