CTATX-MIB :: ruleTcpProfile

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCTATX-MIBruleTcpProfile

ruleTcpProfile

Module: CTATX-MIB

OID (symbolic): CTATX-MIB::ruleTcpProfile

OID (numeric): 1.3.6.1.4.1.97.3.23.2.1.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Which profile to use (i.e., the value of profileIndex) for TCP packets for non-established sessions. A non-established session is indicated by neither the ACK nor RST bit being set in the TCP packet. A value of 0 means no profile, i.e., filter all packets. This rule only applies to packets with a fragment offset of zero.

What is ruleTcpProfile?

This selects which profile governs TCP packets for sessions that are not yet established, identified by neither the ACK nor RST bit being set, with 0 meaning all such packets are filtered. This lets an admin control which new TCP connection attempts are allowed based on port ranges, separately from already-established traffic. An admin wanting to block all new inbound TCP connection attempts under a rule would set ruleTcpProfile to 0.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.97.3.23.2.1.8
snmpwalk -v2c -c public <target> CTATX-MIB::ruleTcpProfile

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.97.3.23.2.1.8.1
snmpget -v2c -c public <target> CTATX-MIB::ruleTcpProfile.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.97.3.23.2.1.8.1 i <value>

Start monitoring Cabletron/Enterasys ATX switch module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTATX-MIB::ruleTcpProfile OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys ATX switch module from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.97sigmaCT-ELS10-27-MIB
Numeric OIDNameModule
1.3.6.1.4.1.97.3ecs_1CTATX-MIB
1.3.6.1.4.1.97.3.23ssecureCTATX-MIB
1.3.6.1.4.1.97.3.23.2ruleTableCTATX-MIB
1.3.6.1.4.1.97.3.23.2.1ruleEntryCTATX-MIB
1.3.6.1.4.1.97.3.23.2.1.8ruleTcpProfileCTATX-MIB