All MIBs › CTATX-MIB › ruleAllowIgp
ruleAllowIgp
Module: CTATX-MIB
OID (symbolic): CTATX-MIB::ruleAllowIgp
OID (numeric): 1.3.6.1.4.1.97.3.23.2.1.16
Node type: OBJECT-TYPE
Type: Boolean
Access: read-write
Description: Whether to forward IGP packets (IP protocol 9).
What is ruleAllowIgp?
This boolean controls whether Interior Gateway Protocol packets, IP protocol 9, are forwarded under this rule. It determines whether this specific interior-routing protocol traffic can cross the filtered port. An admin running IGP-based routing exchanges across this circuit would need ruleAllowIgp enabled to avoid breaking route propagation.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.97.3.23.2.1.16 snmpwalk -v2c -c public <target> CTATX-MIB::ruleAllowIgp
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.97.3.23.2.1.16.1 snmpget -v2c -c public <target> CTATX-MIB::ruleAllowIgp.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.97.3.23.2.1.16.1 s <value>
Start monitoring Cabletron/Enterasys ATX switch module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTATX-MIB::ruleAllowIgp OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys ATX switch module from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.97 | sigma | CT-ELS10-27-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.97.3 | ecs_1 | CTATX-MIB |
| 1.3.6.1.4.1.97.3.23 | ssecure | CTATX-MIB |
| 1.3.6.1.4.1.97.3.23.2 | ruleTable | CTATX-MIB |
| 1.3.6.1.4.1.97.3.23.2.1 | ruleEntry | CTATX-MIB |
| 1.3.6.1.4.1.97.3.23.2.1.16 | ruleAllowIgp | CTATX-MIB |