All MIBs › CTATX-MIB › ruleAllowEgp
ruleAllowEgp
Module: CTATX-MIB
OID (symbolic): CTATX-MIB::ruleAllowEgp
OID (numeric): 1.3.6.1.4.1.97.3.23.2.1.15
Node type: OBJECT-TYPE
Type: Boolean
Access: read-write
Description: Whether to forward EGP packets (IP protocol 8).
What is ruleAllowEgp?
This boolean controls whether Exterior Gateway Protocol packets, IP protocol 8, are forwarded under this rule. EGP is an older inter-autonomous-system routing protocol, so this setting matters only where legacy EGP peering is still in use. An admin maintaining a legacy EGP peering session through this router would need ruleAllowEgp enabled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.97.3.23.2.1.15 snmpwalk -v2c -c public <target> CTATX-MIB::ruleAllowEgp
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.97.3.23.2.1.15.1 snmpget -v2c -c public <target> CTATX-MIB::ruleAllowEgp.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.97.3.23.2.1.15.1 s <value>
Start monitoring Cabletron/Enterasys ATX switch module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTATX-MIB::ruleAllowEgp OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys ATX switch module from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.97 | sigma | CT-ELS10-27-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.97.3 | ecs_1 | CTATX-MIB |
| 1.3.6.1.4.1.97.3.23 | ssecure | CTATX-MIB |
| 1.3.6.1.4.1.97.3.23.2 | ruleTable | CTATX-MIB |
| 1.3.6.1.4.1.97.3.23.2.1 | ruleEntry | CTATX-MIB |
| 1.3.6.1.4.1.97.3.23.2.1.15 | ruleAllowEgp | CTATX-MIB |