CTATX-MIB :: ipMRouteEnable

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCTATX-MIBipMRouteEnable

ipMRouteEnable

Module: CTATX-MIB

OID (symbolic): CTATX-MIB::ipMRouteEnable

OID (numeric): 1.3.6.1.4.1.97.3.26.1.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The enabled status of IP Multicast routing on this router.

What is ipMRouteEnable?

This read-write INTEGER, enabled or disabled, controls whether IP multicast routing is active on this router. An admin toggles this to turn multicast routing on or off for the device as a whole. For example, setting this to disabled(2) on a router not meant to participate in multicast stops it from building or acting on any of the ipMRoute table entries described elsewhere in this MIB.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.97.3.26.1.1.1
snmpwalk -v2c -c public <target> CTATX-MIB::ipMRouteEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.97.3.26.1.1.1.1
snmpget -v2c -c public <target> CTATX-MIB::ipMRouteEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.97.3.26.1.1.1.1 i <value>

Start monitoring Cabletron/Enterasys ATX switch module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTATX-MIB::ipMRouteEnable OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys ATX switch module from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.97sigmaCT-ELS10-27-MIB
Numeric OIDNameModule
1.3.6.1.4.1.97.3ecs_1CTATX-MIB
1.3.6.1.4.1.97.3.26ipMRouteMIBCTATX-MIB
1.3.6.1.4.1.97.3.26.1ipMRouteMIBObjectsCTATX-MIB
1.3.6.1.4.1.97.3.26.1.1ipMRouteCTATX-MIB
1.3.6.1.4.1.97.3.26.1.1.1ipMRouteEnableCTATX-MIB