CT-FASTPATH-DYNAMIC-ARP-INSPECTION-MIB :: ctAgentDaiIfTrustEnable

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CT-FASTPATH-DYNAMIC-ARP-INSPECTION-MIB › ctAgentDaiIfTrustEnable

ctAgentDaiIfTrustEnable

Module: CT-FASTPATH-DYNAMIC-ARP-INSPECTION-MIB

OID (symbolic): CT-FASTPATH-DYNAMIC-ARP-INSPECTION-MIB::ctAgentDaiIfTrustEnable

OID (numeric): 1.3.6.1.4.1.52.4.2.36.1.1.7.1.1

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: This object indicates whether the interface is trusted for Dynamic ARP Inspection purpose.

If this object is set to 'true', the interface is trusted. ARP packets coming to this interface will be forwarded without checking.

If this object is set to 'false', the interface is not trusted. ARP packets coming to this interface will be subjected to ARP inspection.

What is ctAgentDaiIfTrustEnable?

This read-write TruthValue marks whether an interface is trusted for Dynamic ARP Inspection, meaning ARP packets on it are forwarded without inspection, versus untrusted interfaces where all ARP traffic is subject to validation. An administrator sets this true only on ports where ARP traffic should bypass inspection entirely, such as trunk links to other trusted switches. For example, an admin would set ctAgentDaiIfTrustEnable to true on an inter-switch trunk port while leaving user access ports untrusted and subject to full DAI checking.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.2.36.1.1.7.1.1
snmpwalk -v2c -c public <target> CT-FASTPATH-DYNAMIC-ARP-INSPECTION-MIB::ctAgentDaiIfTrustEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.2.36.1.1.7.1.1.1
snmpget -v2c -c public <target> CT-FASTPATH-DYNAMIC-ARP-INSPECTION-MIB::ctAgentDaiIfTrustEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.2.36.1.1.7.1.1.1 s <value>

Start monitoring Enterasys/Cabletron FastPath switch (Dynamic ARP Inspection) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CT-FASTPATH-DYNAMIC-ARP-INSPECTION-MIB::ctAgentDaiIfTrustEnable OID value, configure state conditions and alerts, and monitor any Enterasys/Cabletron FastPath switch (Dynamic ARP Inspection) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCTRON-AP3000-MIB
1.3.6.1.4.1.52.4.2ctronExpCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.2.36ctDynamicArpInspectionExpMibCTRON-MIB-NAMES
Numeric OIDNameModule
1.3.6.1.4.1.52.4.2.36.1ctFastPathDynamicArpInspectionMIBCT-FASTPATH-DYNAMIC-ARP-INSPECTION-MIB
1.3.6.1.4.1.52.4.2.36.1.1ctAgentDaiConfigGroupCT-FASTPATH-DYNAMIC-ARP-INSPECTION-MIB
1.3.6.1.4.1.52.4.2.36.1.1.7ctAgentDaiIfConfigTableCT-FASTPATH-DYNAMIC-ARP-INSPECTION-MIB
1.3.6.1.4.1.52.4.2.36.1.1.7.1ctAgentDaiIfConfigEntryCT-FASTPATH-DYNAMIC-ARP-INSPECTION-MIB
1.3.6.1.4.1.52.4.2.36.1.1.7.1.1ctAgentDaiIfTrustEnableCT-FASTPATH-DYNAMIC-ARP-INSPECTION-MIB