CT-FASTPATH-DYNAMIC-ARP-INSPECTION-MIB :: ctAgentDaiIfBurstInterval

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CT-FASTPATH-DYNAMIC-ARP-INSPECTION-MIB › ctAgentDaiIfBurstInterval

ctAgentDaiIfBurstInterval

Module: CT-FASTPATH-DYNAMIC-ARP-INSPECTION-MIB

OID (symbolic): CT-FASTPATH-DYNAMIC-ARP-INSPECTION-MIB::ctAgentDaiIfBurstInterval

OID (numeric): 1.3.6.1.4.1.52.4.2.36.1.1.7.1.3

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This object indicates the burst interval value for rate limiting purpose on this interface.

What is ctAgentDaiIfBurstInterval?

This read-write Unsigned32, ranging from 1 to 15 seconds, sets the burst interval window used with the rate limit to decide when Dynamic ARP Inspection begins dropping excess ARP packets on an interface. An administrator tunes this to control how tolerant DAI's rate limiting is of short legitimate ARP bursts before it engages. For example, an admin seeing false-positive drops during normal network discovery bursts might lengthen ctAgentDaiIfBurstInterval to reduce unnecessary drops.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.2.36.1.1.7.1.3
snmpwalk -v2c -c public <target> CT-FASTPATH-DYNAMIC-ARP-INSPECTION-MIB::ctAgentDaiIfBurstInterval

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.2.36.1.1.7.1.3.1
snmpget -v2c -c public <target> CT-FASTPATH-DYNAMIC-ARP-INSPECTION-MIB::ctAgentDaiIfBurstInterval.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.2.36.1.1.7.1.3.1 i <value>

Start monitoring Enterasys/Cabletron FastPath switch (Dynamic ARP Inspection) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CT-FASTPATH-DYNAMIC-ARP-INSPECTION-MIB::ctAgentDaiIfBurstInterval OID value, configure state conditions and alerts, and monitor any Enterasys/Cabletron FastPath switch (Dynamic ARP Inspection) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCTRON-AP3000-MIB
1.3.6.1.4.1.52.4.2ctronExpCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.2.36ctDynamicArpInspectionExpMibCTRON-MIB-NAMES
Numeric OIDNameModule
1.3.6.1.4.1.52.4.2.36.1ctFastPathDynamicArpInspectionMIBCT-FASTPATH-DYNAMIC-ARP-INSPECTION-MIB
1.3.6.1.4.1.52.4.2.36.1.1ctAgentDaiConfigGroupCT-FASTPATH-DYNAMIC-ARP-INSPECTION-MIB
1.3.6.1.4.1.52.4.2.36.1.1.7ctAgentDaiIfConfigTableCT-FASTPATH-DYNAMIC-ARP-INSPECTION-MIB
1.3.6.1.4.1.52.4.2.36.1.1.7.1ctAgentDaiIfConfigEntryCT-FASTPATH-DYNAMIC-ARP-INSPECTION-MIB
1.3.6.1.4.1.52.4.2.36.1.1.7.1.3ctAgentDaiIfBurstIntervalCT-FASTPATH-DYNAMIC-ARP-INSPECTION-MIB