All MIBs › CT-FASTPATH-DYNAMIC-ARP-INSPECTION-MIB › ctAagentDaiStatsReset
ctAagentDaiStatsReset
Module: CT-FASTPATH-DYNAMIC-ARP-INSPECTION-MIB
OID (symbolic): CT-FASTPATH-DYNAMIC-ARP-INSPECTION-MIB::ctAagentDaiStatsReset
OID (numeric): 1.3.6.1.4.1.52.4.2.36.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Clear the DAI statistics on all vlans. A value of reset(1) is used to reset the statistics. A read on this object will always return the value none(0). The value none(0) cannot be forcibly set by the administrator.
What is ctAagentDaiStatsReset?
This read-write enumerated INTEGER, when set to reset(1), clears the Dynamic ARP Inspection statistics on all VLANs, and always reads back as none(0) since that value can't be forced by an administrator. An administrator uses this to zero out DAI counters before starting a fresh monitoring window. For example, after tightening DAI ACL rules on a VLAN, an admin would set ctAagentDaiStatsReset to reset(1) to clear old drop counts and observe any new violations cleanly.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.2.36.1.1.5 snmpwalk -v2c -c public <target> CT-FASTPATH-DYNAMIC-ARP-INSPECTION-MIB::ctAagentDaiStatsReset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.2.36.1.1.5.1 snmpget -v2c -c public <target> CT-FASTPATH-DYNAMIC-ARP-INSPECTION-MIB::ctAagentDaiStatsReset.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.2.36.1.1.5.1 i <value>
Start monitoring Enterasys/Cabletron FastPath switch (Dynamic ARP Inspection) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CT-FASTPATH-DYNAMIC-ARP-INSPECTION-MIB::ctAagentDaiStatsReset OID value, configure state conditions and alerts, and monitor any Enterasys/Cabletron FastPath switch (Dynamic ARP Inspection) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CTRON-AP3000-MIB |
| 1.3.6.1.4.1.52.4.2 | ctronExp | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.2.36 | ctDynamicArpInspectionExpMib | CTRON-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.2.36.1 | ctFastPathDynamicArpInspectionMIB | CT-FASTPATH-DYNAMIC-ARP-INSPECTION-MIB |
| 1.3.6.1.4.1.52.4.2.36.1.1 | ctAgentDaiConfigGroup | CT-FASTPATH-DYNAMIC-ARP-INSPECTION-MIB |
| 1.3.6.1.4.1.52.4.2.36.1.1.5 | ctAagentDaiStatsReset | CT-FASTPATH-DYNAMIC-ARP-INSPECTION-MIB |