CT-FASTPATH-DHCPSNOOPING-MIB :: ctAgentDhcpSnoopingStatsReset

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CT-FASTPATH-DHCPSNOOPING-MIB › ctAgentDhcpSnoopingStatsReset

ctAgentDhcpSnoopingStatsReset

Module: CT-FASTPATH-DHCPSNOOPING-MIB

OID (symbolic): CT-FASTPATH-DHCPSNOOPING-MIB::ctAgentDhcpSnoopingStatsReset

OID (numeric): 1.3.6.1.4.1.52.4.2.35.1.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Clear the DHCP snooping statistics on all ports. A value of reset(1) is used to reset the statistics. A read on this object will always return the value none(0). The value none(0) cannot be forcibly set by the administrator.

What is ctAgentDhcpSnoopingStatsReset?

This read-write enumerated INTEGER, when set to reset(1), clears the DHCP Snooping statistics on all ports, and always reads back as none(0) afterward since that value can't be forced by an administrator. An administrator uses it to zero out accumulated snooping counters before starting a fresh monitoring period. For example, after tightening DHCP Snooping trust settings, an admin would set ctAgentDhcpSnoopingStatsReset to reset(1) to clear old failure counts and watch for new violations cleanly.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.2.35.1.1.6
snmpwalk -v2c -c public <target> CT-FASTPATH-DHCPSNOOPING-MIB::ctAgentDhcpSnoopingStatsReset

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.2.35.1.1.6.1
snmpget -v2c -c public <target> CT-FASTPATH-DHCPSNOOPING-MIB::ctAgentDhcpSnoopingStatsReset.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.2.35.1.1.6.1 i <value>

Start monitoring Cabletron/Enterasys FastPath switch (DHCP snooping) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CT-FASTPATH-DHCPSNOOPING-MIB::ctAgentDhcpSnoopingStatsReset OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys FastPath switch (DHCP snooping) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCTRON-AP3000-MIB
1.3.6.1.4.1.52.4.2ctronExpCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.2.35ctDhcpSnoopingExpMibCTRON-MIB-NAMES
Numeric OIDNameModule
1.3.6.1.4.1.52.4.2.35.1ctFastPathDHCPSnoopingMIBCT-FASTPATH-DHCPSNOOPING-MIB
1.3.6.1.4.1.52.4.2.35.1.1ctAgentDhcpSnoopingConfigGroupCT-FASTPATH-DHCPSNOOPING-MIB
1.3.6.1.4.1.52.4.2.35.1.1.6ctAgentDhcpSnoopingStatsResetCT-FASTPATH-DHCPSNOOPING-MIB