CT-FASTPATH-DHCPSERVER-MIB :: ctAgentDhcpServerManualPoolIpMask

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCT-FASTPATH-DHCPSERVER-MIBctAgentDhcpServerManualPoolIpMask

ctAgentDhcpServerManualPoolIpMask

Module: CT-FASTPATH-DHCPSERVER-MIB

OID (symbolic): CT-FASTPATH-DHCPSERVER-MIB::ctAgentDhcpServerManualPoolIpMask

OID (numeric): 1.3.6.1.4.1.52.4.2.32.1.2.3.1.11

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-write

Description: The bit-combination that renders which portion of the address of the DHCP address pool for a manual binding refers to the network or subnet and which part refers to the host. The IP address must have been set before. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'dynamic'.

What is ctAgentDhcpServerManualPoolIpMask?

This read-write IpAddress sets the subnet mask for a manually reserved DHCP binding, requiring the IP address to already be configured, and shows 0.0.0.0 for un-allocated or dynamic bindings. An administrator completes the subnet definition for a manual reservation with this object after setting the address. For example, after reserving 192.168.10.50 for a printer, the admin would set ctAgentDhcpServerManualPoolIpMask to 255.255.255.0 to finish the manual binding's subnet configuration.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.2.32.1.2.3.1.11
snmpwalk -v2c -c public <target> CT-FASTPATH-DHCPSERVER-MIB::ctAgentDhcpServerManualPoolIpMask

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.2.32.1.2.3.1.11.1
snmpget -v2c -c public <target> CT-FASTPATH-DHCPSERVER-MIB::ctAgentDhcpServerManualPoolIpMask.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.2.32.1.2.3.1.11.1 a <value>

Start monitoring Enterasys/Cabletron FastPath switch (DHCP server) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CT-FASTPATH-DHCPSERVER-MIB::ctAgentDhcpServerManualPoolIpMask OID value, configure state conditions and alerts, and monitor any Enterasys/Cabletron FastPath switch (DHCP server) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCTRON-AP3000-MIB
1.3.6.1.4.1.52.4.2ctronExpCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.2.32ctDhcpServerExpMibCTRON-MIB-NAMES
Numeric OIDNameModule
1.3.6.1.4.1.52.4.2.32.1ctFastPathDHCPServerMIBCT-FASTPATH-DHCPSERVER-MIB
1.3.6.1.4.1.52.4.2.32.1.2ctAgentDhcpServerPoolConfigGroupCT-FASTPATH-DHCPSERVER-MIB
1.3.6.1.4.1.52.4.2.32.1.2.3ctAgentDhcpServerPoolAllocationTableCT-FASTPATH-DHCPSERVER-MIB
1.3.6.1.4.1.52.4.2.32.1.2.3.1ctAgentDhcpServerPoolAllocationEntryCT-FASTPATH-DHCPSERVER-MIB
1.3.6.1.4.1.52.4.2.32.1.2.3.1.11ctAgentDhcpServerManualPoolIpMaskCT-FASTPATH-DHCPSERVER-MIB