CT-FASTPATH-DHCPSERVER-MIB :: ctAgentDhcpServerExcludedAddressRangeStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCT-FASTPATH-DHCPSERVER-MIBctAgentDhcpServerExcludedAddressRangeStatus

ctAgentDhcpServerExcludedAddressRangeStatus

Module: CT-FASTPATH-DHCPSERVER-MIB

OID (symbolic): CT-FASTPATH-DHCPSERVER-MIB::ctAgentDhcpServerExcludedAddressRangeStatus

OID (numeric): 1.3.6.1.4.1.52.4.2.32.1.2.5.1.4

Node type: OBJECT-TYPE

Type: RowStatus

Access: read-write

Description: This specifies the row-status of the excluded address-range. Implemented values are - active(1) and destroy(6). For a valid range, the row-satus will return active(1). When it is set to destroy(6), the corresponding address-range is deleted.

What is ctAgentDhcpServerExcludedAddressRangeStatus?

This read-write RowStatus object reports active for a valid excluded range and, when set to destroy, removes the corresponding excluded address range. An administrator uses it to remove a previously excluded range once those addresses are no longer reserved for static use. For example, an admin reclaiming a block of addresses for dynamic assignment would set ctAgentDhcpServerExcludedAddressRangeStatus to destroy(6) on that range's entry.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.2.32.1.2.5.1.4
snmpwalk -v2c -c public <target> CT-FASTPATH-DHCPSERVER-MIB::ctAgentDhcpServerExcludedAddressRangeStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.2.32.1.2.5.1.4.1
snmpget -v2c -c public <target> CT-FASTPATH-DHCPSERVER-MIB::ctAgentDhcpServerExcludedAddressRangeStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.2.32.1.2.5.1.4.1 s <value>

Start monitoring Enterasys/Cabletron FastPath switch (DHCP server) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CT-FASTPATH-DHCPSERVER-MIB::ctAgentDhcpServerExcludedAddressRangeStatus OID value, configure state conditions and alerts, and monitor any Enterasys/Cabletron FastPath switch (DHCP server) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCTRON-AP3000-MIB
1.3.6.1.4.1.52.4.2ctronExpCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.2.32ctDhcpServerExpMibCTRON-MIB-NAMES
Numeric OIDNameModule
1.3.6.1.4.1.52.4.2.32.1ctFastPathDHCPServerMIBCT-FASTPATH-DHCPSERVER-MIB
1.3.6.1.4.1.52.4.2.32.1.2ctAgentDhcpServerPoolConfigGroupCT-FASTPATH-DHCPSERVER-MIB
1.3.6.1.4.1.52.4.2.32.1.2.5ctAgentDhcpServerExcludedAddressRangeTableCT-FASTPATH-DHCPSERVER-MIB
1.3.6.1.4.1.52.4.2.32.1.2.5.1ctAgentDhcpServerExcludedAddressRangeEntryCT-FASTPATH-DHCPSERVER-MIB
1.3.6.1.4.1.52.4.2.32.1.2.5.1.4ctAgentDhcpServerExcludedAddressRangeStatusCT-FASTPATH-DHCPSERVER-MIB