CT-FASTPATH-DHCPSERVER-MIB :: ctAgentDhcpServerDynamicPoolIpPrefixLength

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCT-FASTPATH-DHCPSERVER-MIBctAgentDhcpServerDynamicPoolIpPrefixLength

ctAgentDhcpServerDynamicPoolIpPrefixLength

Module: CT-FASTPATH-DHCPSERVER-MIB

OID (symbolic): CT-FASTPATH-DHCPSERVER-MIB::ctAgentDhcpServerDynamicPoolIpPrefixLength

OID (numeric): 1.3.6.1.4.1.52.4.2.32.1.2.3.1.4

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This specifies the no. of bits that comprise the address-prefix. The prefix is an alternative way of specifying the network-mask of the client.The IP address must have been set before. This value shows 0, if the binding type is 'un-allocated',or,'mnaual'.

What is ctAgentDhcpServerDynamicPoolIpPrefixLength?

This read-write Unsigned32 specifies the number of bits in the address prefix, an alternative way to express the subnet mask for a dynamic pool, and requires the pool's IP address to already be set. An administrator uses whichever of prefix length or mask is more convenient for their documentation style when finishing a dynamic pool's subnet definition. For example, an admin could set ctAgentDhcpServerDynamicPoolIpPrefixLength to 24 instead of separately specifying a 255.255.255.0 mask.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.2.32.1.2.3.1.4
snmpwalk -v2c -c public <target> CT-FASTPATH-DHCPSERVER-MIB::ctAgentDhcpServerDynamicPoolIpPrefixLength

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.2.32.1.2.3.1.4.1
snmpget -v2c -c public <target> CT-FASTPATH-DHCPSERVER-MIB::ctAgentDhcpServerDynamicPoolIpPrefixLength.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.2.32.1.2.3.1.4.1 i <value>

Start monitoring Enterasys/Cabletron FastPath switch (DHCP server) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CT-FASTPATH-DHCPSERVER-MIB::ctAgentDhcpServerDynamicPoolIpPrefixLength OID value, configure state conditions and alerts, and monitor any Enterasys/Cabletron FastPath switch (DHCP server) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCTRON-AP3000-MIB
1.3.6.1.4.1.52.4.2ctronExpCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.2.32ctDhcpServerExpMibCTRON-MIB-NAMES
Numeric OIDNameModule
1.3.6.1.4.1.52.4.2.32.1ctFastPathDHCPServerMIBCT-FASTPATH-DHCPSERVER-MIB
1.3.6.1.4.1.52.4.2.32.1.2ctAgentDhcpServerPoolConfigGroupCT-FASTPATH-DHCPSERVER-MIB
1.3.6.1.4.1.52.4.2.32.1.2.3ctAgentDhcpServerPoolAllocationTableCT-FASTPATH-DHCPSERVER-MIB
1.3.6.1.4.1.52.4.2.32.1.2.3.1ctAgentDhcpServerPoolAllocationEntryCT-FASTPATH-DHCPSERVER-MIB
1.3.6.1.4.1.52.4.2.32.1.2.3.1.4ctAgentDhcpServerDynamicPoolIpPrefixLengthCT-FASTPATH-DHCPSERVER-MIB