CT-FASTPATH-DHCPSERVER-MIB :: ctAgentDhcpServerDynamicPoolIpMask

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCT-FASTPATH-DHCPSERVER-MIBctAgentDhcpServerDynamicPoolIpMask

ctAgentDhcpServerDynamicPoolIpMask

Module: CT-FASTPATH-DHCPSERVER-MIB

OID (symbolic): CT-FASTPATH-DHCPSERVER-MIB::ctAgentDhcpServerDynamicPoolIpMask

OID (numeric): 1.3.6.1.4.1.52.4.2.32.1.2.3.1.3

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-write

Description: The bit-combination that renders which portion of the address of the DHCP address pool refers to the network or subnet and which part refers to the host.The IP address must have been set before. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'manual'.

What is ctAgentDhcpServerDynamicPoolIpMask?

This read-write IpAddress sets the subnet mask defining which portion of a dynamic pool's address represents the network versus the host, and it requires the pool's IP address to already be set. An administrator configures it to complete the subnet definition for a dynamic pool. For example, after setting the pool's network address to 192.168.50.0, the admin would set ctAgentDhcpServerDynamicPoolIpMask to 255.255.255.0 to define a standard /24 subnet.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.2.32.1.2.3.1.3
snmpwalk -v2c -c public <target> CT-FASTPATH-DHCPSERVER-MIB::ctAgentDhcpServerDynamicPoolIpMask

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.2.32.1.2.3.1.3.1
snmpget -v2c -c public <target> CT-FASTPATH-DHCPSERVER-MIB::ctAgentDhcpServerDynamicPoolIpMask.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.2.32.1.2.3.1.3.1 a <value>

Start monitoring Enterasys/Cabletron FastPath switch (DHCP server) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CT-FASTPATH-DHCPSERVER-MIB::ctAgentDhcpServerDynamicPoolIpMask OID value, configure state conditions and alerts, and monitor any Enterasys/Cabletron FastPath switch (DHCP server) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCTRON-AP3000-MIB
1.3.6.1.4.1.52.4.2ctronExpCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.2.32ctDhcpServerExpMibCTRON-MIB-NAMES
Numeric OIDNameModule
1.3.6.1.4.1.52.4.2.32.1ctFastPathDHCPServerMIBCT-FASTPATH-DHCPSERVER-MIB
1.3.6.1.4.1.52.4.2.32.1.2ctAgentDhcpServerPoolConfigGroupCT-FASTPATH-DHCPSERVER-MIB
1.3.6.1.4.1.52.4.2.32.1.2.3ctAgentDhcpServerPoolAllocationTableCT-FASTPATH-DHCPSERVER-MIB
1.3.6.1.4.1.52.4.2.32.1.2.3.1ctAgentDhcpServerPoolAllocationEntryCT-FASTPATH-DHCPSERVER-MIB
1.3.6.1.4.1.52.4.2.32.1.2.3.1.3ctAgentDhcpServerDynamicPoolIpMaskCT-FASTPATH-DHCPSERVER-MIB