CT-FASTPATH-DHCPSERVER-MIB :: ctAgentDhcpServerAddressConflictStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCT-FASTPATH-DHCPSERVER-MIBctAgentDhcpServerAddressConflictStatus

ctAgentDhcpServerAddressConflictStatus

Module: CT-FASTPATH-DHCPSERVER-MIB

OID (symbolic): CT-FASTPATH-DHCPSERVER-MIB::ctAgentDhcpServerAddressConflictStatus

OID (numeric): 1.3.6.1.4.1.52.4.2.32.1.4.3.1.4

Node type: OBJECT-TYPE

Type: RowStatus

Access: read-write

Description: This specifies the row-status of the conflicting-address entry. Implemented values are - active(1) and destroy(6). For a valid range, the row-satus will return active(1). When it is set to destroy(6), the corresponding conflicting-address entry is cleared.

What is ctAgentDhcpServerAddressConflictStatus?

This read-write RowStatus object reports active for a valid conflict entry, and setting it to destroy clears that specific conflicting-address record. An administrator uses this to remove individual resolved conflict entries from the log rather than clearing the entire conflict history at once. For example, after resolving one specific address conflict, the admin would set ctAgentDhcpServerAddressConflictStatus to destroy(6) just for that entry, leaving other unresolved conflicts intact.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.2.32.1.4.3.1.4
snmpwalk -v2c -c public <target> CT-FASTPATH-DHCPSERVER-MIB::ctAgentDhcpServerAddressConflictStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.2.32.1.4.3.1.4.1
snmpget -v2c -c public <target> CT-FASTPATH-DHCPSERVER-MIB::ctAgentDhcpServerAddressConflictStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.2.32.1.4.3.1.4.1 s <value>

Start monitoring Enterasys/Cabletron FastPath switch (DHCP server) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CT-FASTPATH-DHCPSERVER-MIB::ctAgentDhcpServerAddressConflictStatus OID value, configure state conditions and alerts, and monitor any Enterasys/Cabletron FastPath switch (DHCP server) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCTRON-AP3000-MIB
1.3.6.1.4.1.52.4.2ctronExpCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.2.32ctDhcpServerExpMibCTRON-MIB-NAMES
Numeric OIDNameModule
1.3.6.1.4.1.52.4.2.32.1ctFastPathDHCPServerMIBCT-FASTPATH-DHCPSERVER-MIB
1.3.6.1.4.1.52.4.2.32.1.4ctAgentDhcpServerAddressConflictGroupCT-FASTPATH-DHCPSERVER-MIB
1.3.6.1.4.1.52.4.2.32.1.4.3ctAgentDhcpServerAddressConflictTableCT-FASTPATH-DHCPSERVER-MIB
1.3.6.1.4.1.52.4.2.32.1.4.3.1ctAgentDhcpServerAddressConflictEntryCT-FASTPATH-DHCPSERVER-MIB
1.3.6.1.4.1.52.4.2.32.1.4.3.1.4ctAgentDhcpServerAddressConflictStatusCT-FASTPATH-DHCPSERVER-MIB