CPS6000-MIB :: cps6000At1Ets

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCPS6000-MIBcps6000At1Ets

cps6000At1Ets

Module: CPS6000-MIB

OID (symbolic): CPS6000-MIB::cps6000At1Ets

OID (numeric): 1.3.6.1.4.1.10520.2.1.1.3.15

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Do Email Test Values: start(1)

What is cps6000At1Ets?

This read-write INTEGER control accepts only start(1) and initiates a test email notification from the CPS6000, independent of the relay contact tests on the same At1 block. An administrator uses it to confirm the controller's email alerting path is functioning before relying on it for real alarms. For example, after configuring a new SMTP server, staff would set cps6000At1Ets to start(1) and then check their inbox.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.10520.2.1.1.3.15
snmpwalk -v2c -c public <target> CPS6000-MIB::cps6000At1Ets

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.10520.2.1.1.3.15.1
snmpget -v2c -c public <target> CPS6000-MIB::cps6000At1Ets.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.10520.2.1.1.3.15.1 i <value>

Start monitoring CyberPower CPS6000-series UPS with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPS6000-MIB::cps6000At1Ets OID value, configure state conditions and alerts, and monitor any CyberPower CPS6000-series UPS from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.10520tepsCPS6000-MIB
1.3.6.1.4.1.10520.2controllermibsCPS6000-MIB
1.3.6.1.4.1.10520.2.1releaseCPS6000-MIB
1.3.6.1.4.1.10520.2.1.1cps6000CPS6000-MIB
1.3.6.1.4.1.10520.2.1.1.3cps6000At1CPS6000-MIB
1.3.6.1.4.1.10520.2.1.1.3.15cps6000At1EtsCPS6000-MIB