All MIBs › CPQNUNIF-MIB › cpqnIpFrameType
cpqnIpFrameType
Module: CPQNUNIF-MIB
OID (symbolic): CPQNUNIF-MIB::cpqnIpFrameType
OID (numeric): 1.3.6.1.4.1.232.121.6.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: DURABLE: Except when booting up, an agent communicates over IP using a single frame type defining the type of network that the IP traffic is running on: Ethernet_II or IEEE 802.2_SNAP. When the agent is performing BOOTP, it may not assume any frame type and can attempt to BOOTP over both types. (see cpqnBootpEnable) It will use the frame type that the first BOOTP response uses for the rest of its communication. The frame type of the BOOTP response will be stored by this object. For interfaces that do not have an Ethernet frame type, e.g., the serial port, the frame type is always not-applicable(1).
What is cpqnIpFrameType?
This read-write object selects the Ethernet frame type -Ethernet-II or IEEE 802.2 SNAP- the unit uses for its IP communications, outside of the frame-type negotiation that can occur during BOOTP. An admin sets this to match whatever frame type the rest of the local network segment uses, since a mismatch would prevent IP communication. For example, if the LAN segment only carries Ethernet-II frames, cpqnIpFrameType should be set to ethernet-ii(2) for the unit's IP traffic to be understood.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.121.6.1.1.6 snmpwalk -v2c -c public <target> CPQNUNIF-MIB::cpqnIpFrameType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.121.6.1.1.6.1 snmpget -v2c -c public <target> CPQNUNIF-MIB::cpqnIpFrameType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.232.121.6.1.1.6.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cpqnIpFrameType.1
Start monitoring Compaq/HP network management appliance (Universal Network Interface Framework) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQNUNIF-MIB::cpqnIpFrameType OID value, configure state conditions and alerts, and monitor any Compaq/HP network management appliance (Universal Network Interface Framework) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.121 | cpqnCommon | CPQNUNIF-MIB |
| 1.3.6.1.4.1.232.121.6 | cpqnNetworkInfo | CPQNUNIF-MIB |
| 1.3.6.1.4.1.232.121.6.1 | cpqnIpNetworkTable | CPQNUNIF-MIB |
| 1.3.6.1.4.1.232.121.6.1.1 | cpqnIpNetworkEntry | CPQNUNIF-MIB |
| 1.3.6.1.4.1.232.121.6.1.1.6 | cpqnIpFrameType | CPQNUNIF-MIB |