All MIBs › COM21-HCXTOP-MIB › hcxSlotConfigCardType
hcxSlotConfigCardType
Module: COM21-HCXTOP-MIB
OID (symbolic): COM21-HCXTOP-MIB::hcxSlotConfigCardType
OID (numeric): 1.3.6.1.4.1.1141.2.8.1.1.4
Node type: OBJECT-TYPE
Type: HcxCardType
Access: read-write
Description: contains card type configured for this slot. This attribute will be checked against the set of supported card types and rejected if not present. Note that the cardtype of ethDual10bT can be used to specify either the 4k or 8k CAM versions of the 10bT card. Note that a 10bT or 100bT or oc3 card CANNOT be unconfigured if an STU on an associated VLAN is acquired.
What is hcxSlotConfigCardType?
This read-write HcxCardType sets the card type configured for a slot, which is validated against hcxSlotSupportedTypes and rejected if unsupported, and notably a 10bT, 100bT, or OC3 card cannot be unconfigured while any STU on an associated VLAN is still acquired. An admin must first move or deauthorize subscriber modems off that VLAN before changing the slot's configured card type. For example, an admin's attempt to reconfigure a 100bT slot to a different card type fails because subscriber ComPorts are still acquired on a VLAN riding that card.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1141.2.8.1.1.4 snmpwalk -v2c -c public <target> COM21-HCXTOP-MIB::hcxSlotConfigCardType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1141.2.8.1.1.4.1 snmpget -v2c -c public <target> COM21-HCXTOP-MIB::hcxSlotConfigCardType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1141.2.8.1.1.4.1 s <value>
Start monitoring Com21 ComController HCX unit control/topology (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the COM21-HCXTOP-MIB::hcxSlotConfigCardType OID value, configure state conditions and alerts, and monitor any Com21 ComController HCX unit control/topology (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1141 | com21 | COM21-HCX-MIB |
| 1.3.6.1.4.1.1141.2 | com21Hcx | COM21-HCX-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1141.2.8 | com21HcxSlotGroup | COM21-HCXTOP-MIB |
| 1.3.6.1.4.1.1141.2.8.1 | com21HcxSlotTable | COM21-HCXTOP-MIB |
| 1.3.6.1.4.1.1141.2.8.1.1 | com21HcxSlotEntry | COM21-HCXTOP-MIB |
| 1.3.6.1.4.1.1141.2.8.1.1.4 | hcxSlotConfigCardType | COM21-HCXTOP-MIB |