All MIBs › COM21-HCXSTU-MIB › hcxStuL2IpxFiltEnbl
hcxStuL2IpxFiltEnbl
Module: COM21-HCXSTU-MIB
OID (symbolic): COM21-HCXSTU-MIB::hcxStuL2IpxFiltEnbl
OID (numeric): 1.3.6.1.4.1.1141.2.53.1.1.16
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Specifies whether IPX packets should be filtered for this ComPort. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT card. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for an entire VLAN via the MIB attribute hcxVlanL2IpxFiltEnbl.
What is hcxStuL2IpxFiltEnbl?
This read-write true/false object filters IPX packets for this ComPort in both directions, applicable to 100BT and OC3 but not 10BT, defaulting to false, per the description, and can also be set per-VLAN. An admin enables this to block legacy IPX/Novell NetWare traffic from a specific device that has no business being on a modern IP-based service. For example, an admin enables hcxStuL2IpxFiltEnbl after discovering an old NetWare client on a customer's network generating unwanted IPX broadcast traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1141.2.53.1.1.16 snmpwalk -v2c -c public <target> COM21-HCXSTU-MIB::hcxStuL2IpxFiltEnbl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1141.2.53.1.1.16.1 snmpget -v2c -c public <target> COM21-HCXSTU-MIB::hcxStuL2IpxFiltEnbl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1141.2.53.1.1.16.1 i <value>
Start monitoring Com21 HCX subscriber terminal unit (cable modem CPE, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the COM21-HCXSTU-MIB::hcxStuL2IpxFiltEnbl OID value, configure state conditions and alerts, and monitor any Com21 HCX subscriber terminal unit (cable modem CPE, legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1141 | com21 | COM21-HCX-MIB |
| 1.3.6.1.4.1.1141.2 | com21Hcx | COM21-HCX-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1141.2.53 | com21HcxStuIpFiltGroup | COM21-HCXSTU-MIB |
| 1.3.6.1.4.1.1141.2.53.1 | com21HcxStuIpFiltTable | COM21-HCXSTU-MIB |
| 1.3.6.1.4.1.1141.2.53.1.1 | com21HcxStuIpFiltEntry | COM21-HCXSTU-MIB |
| 1.3.6.1.4.1.1141.2.53.1.1.16 | hcxStuL2IpxFiltEnbl | COM21-HCXSTU-MIB |