COM21-HCXSTU-MIB :: hcxStuIpArpFiltEnable

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCOM21-HCXSTU-MIBhcxStuIpArpFiltEnable

hcxStuIpArpFiltEnable

Module: COM21-HCXSTU-MIB

OID (symbolic): COM21-HCXSTU-MIB::hcxStuIpArpFiltEnable

OID (numeric): 1.3.6.1.4.1.1141.2.53.1.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Specifies whether ARP authentication filtering should be enabled for this ComPort. This filter is applicable to 10BT, 100BT, and OC3 cards. It filters traffic in the upstream direction. Default is false. This filter can also be enabled for an entire VLAN via the MIB attribute hcxVlanIpArpFiltEnbl.

What is hcxStuIpArpFiltEnable?

This read-write true/false object enables ARP authentication filtering for upstream traffic from this ComPort, applicable to 10BT, 100BT, and OC3 cards and defaulting to false, per the description, and notes it can also be enabled at the whole-VLAN level. An admin enables this on a specific device to block spoofed or unauthorized ARP traffic from that subscriber. For example, an admin enables hcxStuIpArpFiltEnable on a single suspicious ComPort suspected of ARP spoofing rather than affecting the whole VLAN.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1141.2.53.1.1.2
snmpwalk -v2c -c public <target> COM21-HCXSTU-MIB::hcxStuIpArpFiltEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1141.2.53.1.1.2.1
snmpget -v2c -c public <target> COM21-HCXSTU-MIB::hcxStuIpArpFiltEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1141.2.53.1.1.2.1 i <value>

Start monitoring Com21 HCX subscriber terminal unit (cable modem CPE, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the COM21-HCXSTU-MIB::hcxStuIpArpFiltEnable OID value, configure state conditions and alerts, and monitor any Com21 HCX subscriber terminal unit (cable modem CPE, legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1141com21COM21-HCX-MIB
1.3.6.1.4.1.1141.2com21HcxCOM21-HCX-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1141.2.53com21HcxStuIpFiltGroupCOM21-HCXSTU-MIB
1.3.6.1.4.1.1141.2.53.1com21HcxStuIpFiltTableCOM21-HCXSTU-MIB
1.3.6.1.4.1.1141.2.53.1.1com21HcxStuIpFiltEntryCOM21-HCXSTU-MIB
1.3.6.1.4.1.1141.2.53.1.1.2hcxStuIpArpFiltEnableCOM21-HCXSTU-MIB