COM21-HCXSTU-MIB :: hcxStuConfSwImage

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCOM21-HCXSTU-MIBhcxStuConfSwImage

hcxStuConfSwImage

Module: COM21-HCXSTU-MIB

OID (symbolic): COM21-HCXSTU-MIB::hcxStuConfSwImage

OID (numeric): 1.3.6.1.4.1.1141.2.51.1.1.14

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-write

Description: Contains the configured software image to be downloaded to the ComPort. The Common Controller download process shall check this value when a download is requested. If this image does not support the hardware specified by the ComPort then an incompatible software version trap shall be generated. It is then up to the user to correct this field. When this field is set, the agent shall check if there is an image of the specified type loaded. If this is not the case then a unavailable software version trap shall be generated. Again, it is the responsibility of the user to ensure that the required image is downloaded. The image identifier shall be represented by 4 numbers deliminated by periods. i.e. a.b.c.d. Each number shall have a value between 0 and 255. This allows storage within a single (four byte) word.

What is hcxStuConfSwImage?

This read-write DisplayString (up to 16 chars) holds the name of the software image configured to be downloaded to the ComPort, and per the description the Common Controller checks this value at download time and raises an incompatible-software-version trap if the image doesn't match the device's hardware. An admin sets this to control which firmware version a subscriber device runs. For example, if the download trap fires for a device, the admin corrects hcxStuConfSwImage to point at an image compatible with that ComPort's actual hardware model.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1141.2.51.1.1.14
snmpwalk -v2c -c public <target> COM21-HCXSTU-MIB::hcxStuConfSwImage

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1141.2.51.1.1.14.1
snmpget -v2c -c public <target> COM21-HCXSTU-MIB::hcxStuConfSwImage.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1141.2.51.1.1.14.1 s <value>

Start monitoring Com21 HCX subscriber terminal unit (cable modem CPE, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the COM21-HCXSTU-MIB::hcxStuConfSwImage OID value, configure state conditions and alerts, and monitor any Com21 HCX subscriber terminal unit (cable modem CPE, legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1141com21COM21-HCX-MIB
1.3.6.1.4.1.1141.2com21HcxCOM21-HCX-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1141.2.51com21HcxStuStatusGroupCOM21-HCXSTU-MIB
1.3.6.1.4.1.1141.2.51.1com21HcxStuStatusTableCOM21-HCXSTU-MIB
1.3.6.1.4.1.1141.2.51.1.1com21HcxStuStatusEntryCOM21-HCXSTU-MIB
1.3.6.1.4.1.1141.2.51.1.1.14hcxStuConfSwImageCOM21-HCXSTU-MIB