All MIBs › CODIMA-EXPRESS-MIB › slp2Collisions
slp2Collisions
Module: CODIMA-EXPRESS-MIB
OID (symbolic): CODIMA-EXPRESS-MIB::slp2Collisions
OID (numeric): 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.24
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description: Number of Collisions monitored on Port 2. Collisions are the result of two workstations trying to use shared a transmission medium (cable) simultaneously, e.g., using Ethernet CSMA/CD. The electrical signals, which carry the information the workstations are sending, bump into each other, ruining both signals. This means both workstations will have to re-transmit their information. In most systems, a built-in delay will make sure the collision does not occur again. A value of 4294967294 indicates unknown.
What is slp2Collisions?
This read-only Counter32 counts collisions, which the description explains occur when two stations transmit on a shared CSMA/CD medium simultaneously, recorded on Port 2 during this 15-minute long-term sample, with 4294967294 meaning unknown. An admin uses a high Collisions count on Port 2 to recognize a shared-medium or duplex-mismatch problem forcing repeated retransmissions and degrading effective throughput. For example, Collisions rising in step with utilization on Port 2 suggests the segment is genuinely contending for a shared medium under load, rather than a duplex misconfiguration that would show high collisions even at low load.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.24 snmpwalk -v2c -c public <target> CODIMA-EXPRESS-MIB::slp2Collisions
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.24.1 snmpget -v2c -c public <target> CODIMA-EXPRESS-MIB::slp2Collisions.1
Start monitoring Codima Express network-intelligence appliance (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CODIMA-EXPRESS-MIB::slp2Collisions OID value, configure state conditions and alerts, and monitor any Codima Express network-intelligence appliance (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.226 | codima | CODIMA-GLOBAL-REG |
| 1.3.6.1.4.1.226.3 | codimaProducts | CODIMA-GLOBAL-REG |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.226.3.2 | codimaExpressMIB | CODIMA-EXPRESS-MIB |
| 1.3.6.1.4.1.226.3.2.1 | codimaExpressObjects | CODIMA-EXPRESS-MIB |
| 1.3.6.1.4.1.226.3.2.1.1 | expHistoryDatabases | CODIMA-EXPRESS-MIB |
| 1.3.6.1.4.1.226.3.2.1.1.2 | dbSegment | CODIMA-EXPRESS-MIB |
| 1.3.6.1.4.1.226.3.2.1.1.2.1 | segLongTerm | CODIMA-EXPRESS-MIB |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6 | slPortTable | CODIMA-EXPRESS-MIB |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1 | slPortEntry | CODIMA-EXPRESS-MIB |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.24 | slp2Collisions | CODIMA-EXPRESS-MIB |