CODIMA-EXPRESS-MIB :: ipliMaintenance

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCODIMA-EXPRESS-MIBipliMaintenance

ipliMaintenance

Module: CODIMA-EXPRESS-MIB

OID (symbolic): CODIMA-EXPRESS-MIB::ipliMaintenance

OID (numeric): 1.3.6.1.4.1.226.3.2.1.1.6.1.3.1.31

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: Number of reports in the ICMP Maintenance Group that relate to maintenance problems. The reports include Echo Request, Echo Reply, Time Stamp Request, Time Stamp reply, Info Request, Info Reply, Address Mask Request, Address Mask Reply and Checksum Disable. A value of 4294967294 indicates unknown.

What is ipliMaintenance?

Maintenance is a read-only Counter32 counting the number of reports in the ICMP Maintenance group, covering Echo Request/Reply, Time Stamp Request/Reply, Info Request/Reply, Address Mask Request/Reply and Checksum Disable recorded for this IP-to-IP conversation; a value of 4294967294 means the count is unknown rather than a genuine zero. This counter matters to an admin because it isolates routine diagnostic and housekeeping ICMP exchanges rather than error conditions, letting them see that specific condition trending up without having to sift through every ICMP message the host or pair exchanged. If Maintenance for the pair 10.4.12.30 and 198.51.100.7 starts climbing while other ICMP counters in the same row stay flat, that isolated rise points specifically at routine diagnostic and housekeeping ICMP exchanges rather than error conditions rather than a general ICMP flood.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.226.3.2.1.1.6.1.3.1.31
snmpwalk -v2c -c public <target> CODIMA-EXPRESS-MIB::ipliMaintenance

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.226.3.2.1.1.6.1.3.1.31.1
snmpget -v2c -c public <target> CODIMA-EXPRESS-MIB::ipliMaintenance.1

Start monitoring Codima Express network-intelligence appliance (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CODIMA-EXPRESS-MIB::ipliMaintenance OID value, configure state conditions and alerts, and monitor any Codima Express network-intelligence appliance (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.226codimaCODIMA-GLOBAL-REG
1.3.6.1.4.1.226.3codimaProductsCODIMA-GLOBAL-REG
Numeric OIDNameModule
1.3.6.1.4.1.226.3.2codimaExpressMIBCODIMA-EXPRESS-MIB
1.3.6.1.4.1.226.3.2.1codimaExpressObjectsCODIMA-EXPRESS-MIB
1.3.6.1.4.1.226.3.2.1.1expHistoryDatabasesCODIMA-EXPRESS-MIB
1.3.6.1.4.1.226.3.2.1.1.6dbIPv4PeerCODIMA-EXPRESS-MIB
1.3.6.1.4.1.226.3.2.1.1.6.1ipPeerLongTermCODIMA-EXPRESS-MIB
1.3.6.1.4.1.226.3.2.1.1.6.1.3iplIcmpTableCODIMA-EXPRESS-MIB
1.3.6.1.4.1.226.3.2.1.1.6.1.3.1iplIcmpEntryCODIMA-EXPRESS-MIB
1.3.6.1.4.1.226.3.2.1.1.6.1.3.1.31ipliMaintenanceCODIMA-EXPRESS-MIB