CNT245-MIB :: cnt2ifDecompressionRatio

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CNT245-MIB › cnt2ifDecompressionRatio

cnt2ifDecompressionRatio

Module: CNT245-MIB

OID (symbolic): CNT245-MIB::cnt2ifDecompressionRatio

OID (numeric): 1.3.6.1.4.1.333.2.4.5.4.1.4

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: The Decompression ratio for this index. 
                     The value is represent 1 to xx.xx decompression
                     Ratio. Example: Ratio of 13.82 :1 would have this 
                     set to a value of 1382.
                     The internal Calculation is done as:
100 * (ifInOctets + cnt2ifDeCompressedOctets)
                            ---------------------------------------------
             ifInOctets
                     Then the result is mod by 100 for floating point. 
                     This OID gets created dynamically when there 
                     is a decompression circuit active.

What is cnt2ifDecompressionRatio?

This Integer32 reports this interface's decompression ratio encoded as an integer, where for example a value of 1382 represents a 13.82 to 1 ratio, and this object only exists while a decompression circuit is actively running on that interface. An administrator uses this single figure to quickly compare decompression efficiency across interfaces without recalculating it from raw octet counters. For example, cnt2ifDecompressionRatio showing 1382 tells the admin this interface's inbound traffic is being expanded at roughly 13.82 to 1 by the decompression engine.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.333.2.4.5.4.1.4
snmpwalk -v2c -c public <target> CNT245-MIB::cnt2ifDecompressionRatio

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.333.2.4.5.4.1.4.1
snmpget -v2c -c public <target> CNT245-MIB::cnt2ifDecompressionRatio.1

Start monitoring CNT 2.45-series Fibre Channel switch/compression engine (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CNT245-MIB::cnt2ifDecompressionRatio OID value, configure state conditions and alerts, and monitor any CNT 2.45-series Fibre Channel switch/compression engine (legacy) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.333cntCNT2-MIB
1.3.6.1.4.1.333.2cnt2CNT2-MIB
1.3.6.1.4.1.333.2.4cnt2SubagentCNT2-MIB
Numeric OIDNameModule
1.3.6.1.4.1.333.2.4.5cnt2CompressionCNT245-MIB
1.3.6.1.4.1.333.2.4.5.4cnt2ifDecompressionTableCNT245-MIB
1.3.6.1.4.1.333.2.4.5.4.1cnt2ifDecompressionEntryCNT245-MIB
1.3.6.1.4.1.333.2.4.5.4.1.4cnt2ifDecompressionRatioCNT245-MIB