All MIBs › CLAB-GRE-MIB › clabGRETunnnelRemoteEndpointConnectivityState
clabGRETunnnelRemoteEndpointConnectivityState
Module: CLAB-GRE-MIB
OID (symbolic): CLAB-GRE-MIB::clabGRETunnnelRemoteEndpointConnectivityState
OID (numeric): 1.3.6.1.4.1.4491.4.3.1.3.1.20
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: Comma-separated list (up to 4 items) of strings. Each item corresponds to one item in the RemoteEndpoints list, and contains one of the following strings: 'Reachable' indicates that the corresponding remote endpoint is responding to any configured KeepAlive messages. 'Unreachable' indicates that the remote endpoint has failed to adequately respond to the most recent KeepAlive attempt. 'NotInUse' indicates that the remote endpoint has not been used. 'NoKeepAlives' indicates that the KeepAlive policy is set to 'none'.
What is clabGRETunnnelRemoteEndpointConnectivityState?
This read-only octet string reports, as a comma-separated list matching the RemoteEndpoints list, whether each configured remote endpoint is 'Reachable', 'Unreachable', or 'NotInUse' based on keepalive responsiveness. An administrator reads it to see the health of every configured remote endpoint for a tunnel at a glance, not just the currently connected one. For example, seeing the primary endpoint reported 'Unreachable' while a secondary shows 'Reachable' confirms the tunnel correctly detected a primary concentrator outage and has a viable fallback.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.4.3.1.3.1.20 snmpwalk -v2c -c public <target> CLAB-GRE-MIB::clabGRETunnnelRemoteEndpointConnectivityState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.4.3.1.3.1.20.1 snmpget -v2c -c public <target> CLAB-GRE-MIB::clabGRETunnnelRemoteEndpointConnectivityState.1
Start monitoring CableLabs DOCSIS residential gateways (GRE tunnels) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CLAB-GRE-MIB::clabGRETunnnelRemoteEndpointConnectivityState OID value, configure state conditions and alerts, and monitor any CableLabs DOCSIS residential gateways (GRE tunnels) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4491 | cableLabs | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.4 | clabCommonMibs | CLAB-DEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4491.4.3 | clabGREMib | CLAB-GRE-MIB |
| 1.3.6.1.4.1.4491.4.3.1 | clabGREObjects | CLAB-GRE-MIB |
| 1.3.6.1.4.1.4491.4.3.1.3 | clabGRETunnelTable | CLAB-GRE-MIB |
| 1.3.6.1.4.1.4491.4.3.1.3.1 | clabGRETunnelEntry | CLAB-GRE-MIB |
| 1.3.6.1.4.1.4491.4.3.1.3.1.20 | clabGRETunnnelRemoteEndpointConnectivityState | CLAB-GRE-MIB |