All MIBs › CLAB-ANI-DEV-MIB › aniDevLoggingCtrlReset
aniDevLoggingCtrlReset
Module: CLAB-ANI-DEV-MIB
OID (symbolic): CLAB-ANI-DEV-MIB::aniDevLoggingCtrlReset
OID (numeric): 1.3.6.1.4.1.4491.4.7.1.2.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Setting this object to resetLog(1) empties the logging table. Setting this object to pauseLog(2) causes the ANI device to stop writing events to the logging table. Setting this object to startLog(3) causes the ANI device to start writing events to the logging table. Reading this object returns either pauseLog(2) or startLog(3). The default is startLog(3). Log event pausing is independent of any other log filtering mechanisms, e.g., levels. Setting it to useDefaultReporting(4) resets the log (i.e., empties) and returns all event levels to the factory-default reporting.
What is aniDevLoggingCtrlReset?
This INTEGER object controls the device's event logging table, letting an operator resetLog(1) to empty it, pauseLog(2) or startLog(3) to stop or resume writing new events, or useDefaultReporting(4) to restore default behavior, while reads return only pauseLog or startLog. An administrator uses it to manage log table growth and control logging during maintenance windows. For example, an operator troubleshooting a device might pauseLog(2) briefly to freeze the log's contents for inspection, then startLog(3) to resume normal event capture.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.4.7.1.2.1 snmpwalk -v2c -c public <target> CLAB-ANI-DEV-MIB::aniDevLoggingCtrlReset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.4.7.1.2.1.1 snmpget -v2c -c public <target> CLAB-ANI-DEV-MIB::aniDevLoggingCtrlReset.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4491.4.7.1.2.1.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> aniDevLoggingCtrlReset.1
Start monitoring DOCSIS cable gateway/sRouter devices with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CLAB-ANI-DEV-MIB::aniDevLoggingCtrlReset OID value, configure state conditions and alerts, and monitor any DOCSIS cable gateway/sRouter devices from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4491 | cableLabs | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.4 | clabCommonMibs | CLAB-DEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4491.4.7 | clabAniDevMib | CLAB-ANI-DEV-MIB |
| 1.3.6.1.4.1.4491.4.7.1 | clabAniDevObjects | CLAB-ANI-DEV-MIB |
| 1.3.6.1.4.1.4491.4.7.1.2 | clabAniDevSysLoggingObjects | CLAB-ANI-DEV-MIB |
| 1.3.6.1.4.1.4491.4.7.1.2.1 | aniDevLoggingCtrlReset | CLAB-ANI-DEV-MIB |