CISCOSB-rlInterfaces :: swIfSpeedDuplexNegotiationRemoteCapabilities

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCOSB-rlInterfacesswIfSpeedDuplexNegotiationRemoteCapabilities

swIfSpeedDuplexNegotiationRemoteCapabilities

Module: CISCOSB-rlInterfaces

OID (symbolic): CISCOSB-rlInterfaces::swIfSpeedDuplexNegotiationRemoteCapabilities

OID (numeric): 1.3.6.1.4.1.9.6.1.101.43.1.1.42

Node type: OBJECT-TYPE

Type: AutoNegCapabilitiesBits

Access: read-only

Description: Operative auto negotiation capabilities of the remote link. unknown bit means that port operative status is not up, or auto negotiation process not complete, or remote link is not auto negotiation able.

What is swIfSpeedDuplexNegotiationRemoteCapabilities?

This read-only AutoNegCapabilitiesBits value reports the operative auto-negotiation capabilities of the remote link partner, with unknown meaning the port isn't up, negotiation hasn't completed, or the remote device isn't auto-negotiation capable at all, per the description. Admins use this to distinguish those three failure modes when a link isn't behaving as expected during negotiation troubleshooting. For example, seeing unknown here on a port physically connected and up would suggest the remote device simply doesn't support auto-negotiation, rather than a negotiation timing issue.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.43.1.1.42
snmpwalk -v2c -c public <target> CISCOSB-rlInterfaces::swIfSpeedDuplexNegotiationRemoteCapabilities

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.43.1.1.42.1
snmpget -v2c -c public <target> CISCOSB-rlInterfaces::swIfSpeedDuplexNegotiationRemoteCapabilities.1

Start monitoring Cisco Small Business switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCOSB-rlInterfaces::swIfSpeedDuplexNegotiationRemoteCapabilities OID value, configure state conditions and alerts, and monitor any Cisco Small Business switch from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.6otherEnterprisesCISCO-SMI
1.3.6.1.4.1.9.6.1ciscoSBCISCO-SMI
1.3.6.1.4.1.9.6.1.101switch001CISCOSB-MIB
1.3.6.1.4.1.9.6.1.101.43swInterfacesCISCOSB-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.6.1.101.43.1swIfTableCISCOSB-rlInterfaces
1.3.6.1.4.1.9.6.1.101.43.1.1swIfEntryCISCOSB-rlInterfaces
1.3.6.1.4.1.9.6.1.101.43.1.1.42swIfSpeedDuplexNegotiationRemoteCapabilitiesCISCOSB-rlInterfaces