CISCOSB-rlInterfaces :: swIfSingleHostViolationOperTrapCount

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCOSB-rlInterfacesswIfSingleHostViolationOperTrapCount

swIfSingleHostViolationOperTrapCount

Module: CISCOSB-rlInterfaces

OID (symbolic): CISCOSB-rlInterfaces::swIfSingleHostViolationOperTrapCount

OID (numeric): 1.3.6.1.4.1.9.6.1.101.43.1.1.35

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This variable indicates the trap counter status per ifIndex (i.e. number of received packets since the last trap sent due to a packet which was received on this ifIndex). It's relevant only in single authorized while trap is enabled.

What is swIfSingleHostViolationOperTrapCount?

This read-only INTEGER (0-2147483647) counts, per ifIndex, the number of packets received since the last single-host-violation trap was sent, relevant only while in single-authorized mode with trapping enabled, per the description. Admins use it to gauge how much unauthorized traffic has accumulated between violation alerts on a given port, indicating whether an intrusion attempt is a one-off or sustained. For example, a rapidly increasing count here between traps would tell the admin that a specific single-host port is experiencing a continuous stream of unauthorized packets rather than an isolated attempt.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.43.1.1.35
snmpwalk -v2c -c public <target> CISCOSB-rlInterfaces::swIfSingleHostViolationOperTrapCount

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.43.1.1.35.1
snmpget -v2c -c public <target> CISCOSB-rlInterfaces::swIfSingleHostViolationOperTrapCount.1

Start monitoring Cisco Small Business switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCOSB-rlInterfaces::swIfSingleHostViolationOperTrapCount OID value, configure state conditions and alerts, and monitor any Cisco Small Business switch from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.6otherEnterprisesCISCO-SMI
1.3.6.1.4.1.9.6.1ciscoSBCISCO-SMI
1.3.6.1.4.1.9.6.1.101switch001CISCOSB-MIB
1.3.6.1.4.1.9.6.1.101.43swInterfacesCISCOSB-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.6.1.101.43.1swIfTableCISCOSB-rlInterfaces
1.3.6.1.4.1.9.6.1.101.43.1.1swIfEntryCISCOSB-rlInterfaces
1.3.6.1.4.1.9.6.1.101.43.1.1.35swIfSingleHostViolationOperTrapCountCISCOSB-rlInterfaces