CISCOSB-rlInterfaces :: swIfSingleHostViolationAdminTrapFrequency

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCOSB-rlInterfacesswIfSingleHostViolationAdminTrapFrequency

swIfSingleHostViolationAdminTrapFrequency

Module: CISCOSB-rlInterfaces

OID (symbolic): CISCOSB-rlInterfaces::swIfSingleHostViolationAdminTrapFrequency

OID (numeric): 1.3.6.1.4.1.9.6.1.101.43.1.1.36

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This variable indicates the minimal frequency (in seconds) of sending a trap per ifIndex. It's relevant only in single authorized and in trap enabled. A value of 0 means that trap is disabled.

What is swIfSingleHostViolationAdminTrapFrequency?

This read-write INTEGER (0-1000000) sets the minimal interval, in seconds, between single-host-violation traps per ifIndex, with 0 meaning trapping is disabled, relevant only in single-authorized mode with trapping enabled, per the description. Admins tune this to control how often they're alerted about repeated unauthorized-device attempts on a single-host 802.1X port without being flooded with duplicate traps. For example, setting this to 120 ensures the admin receives at most one violation notification every two minutes for that port even under continuous attempted access.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.43.1.1.36
snmpwalk -v2c -c public <target> CISCOSB-rlInterfaces::swIfSingleHostViolationAdminTrapFrequency

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.43.1.1.36.1
snmpget -v2c -c public <target> CISCOSB-rlInterfaces::swIfSingleHostViolationAdminTrapFrequency.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.6.1.101.43.1.1.36.1 i <value>

Start monitoring Cisco Small Business switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCOSB-rlInterfaces::swIfSingleHostViolationAdminTrapFrequency OID value, configure state conditions and alerts, and monitor any Cisco Small Business switch from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.6otherEnterprisesCISCO-SMI
1.3.6.1.4.1.9.6.1ciscoSBCISCO-SMI
1.3.6.1.4.1.9.6.1.101switch001CISCOSB-MIB
1.3.6.1.4.1.9.6.1.101.43swInterfacesCISCOSB-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.6.1.101.43.1swIfTableCISCOSB-rlInterfaces
1.3.6.1.4.1.9.6.1.101.43.1.1swIfEntryCISCOSB-rlInterfaces
1.3.6.1.4.1.9.6.1.101.43.1.1.36swIfSingleHostViolationAdminTrapFrequencyCISCOSB-rlInterfaces