All MIBs › CISCOSB-rlInterfaces › rlIfCutPriorityTwo
rlIfCutPriorityTwo
Module: CISCOSB-rlInterfaces
OID (symbolic): CISCOSB-rlInterfaces::rlIfCutPriorityTwo
OID (numeric): 1.3.6.1.4.1.9.6.1.101.54.21
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: Enable or disable cut-Through for priority 2.
What is rlIfCutPriorityTwo?
This read-write TruthValue enables or disables Cut-Through switching for traffic marked with 802.1p priority 2 on this interface, per the description. It gives admins granular, per-priority control over which traffic classes benefit from cut-through's reduced latency versus standard store-and-forward's full error checking. For example, enabling cut-through at priority 2 for a specific latency-sensitive application class lets that traffic move faster while priorities not enabled here retain full frame validation before forwarding.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.54.21 snmpwalk -v2c -c public <target> CISCOSB-rlInterfaces::rlIfCutPriorityTwo
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.54.21.1 snmpget -v2c -c public <target> CISCOSB-rlInterfaces::rlIfCutPriorityTwo.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.6.1.101.54.21.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> rlIfCutPriorityTwo.1
Start monitoring Cisco Small Business switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCOSB-rlInterfaces::rlIfCutPriorityTwo OID value, configure state conditions and alerts, and monitor any Cisco Small Business switch from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.6 | otherEnterprises | CISCO-SMI |
| 1.3.6.1.4.1.9.6.1 | ciscoSB | CISCO-SMI |
| 1.3.6.1.4.1.9.6.1.101 | switch001 | CISCOSB-MIB |
| 1.3.6.1.4.1.9.6.1.101.54 | rlIfInterfaces | CISCOSB-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.6.1.101.54.21 | rlIfCutPriorityTwo | CISCOSB-rlInterfaces |