CISCOSB-rlInterfaces :: rlCutThroughEnable

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCOSB-rlInterfacesrlCutThroughEnable

rlCutThroughEnable

Module: CISCOSB-rlInterfaces

OID (symbolic): CISCOSB-rlInterfaces::rlCutThroughEnable

OID (numeric): 1.3.6.1.4.1.9.6.1.101.54.30

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-only

Description: Cut-Through global enable mode.

What is rlCutThroughEnable?

This read-only TruthValue reports the device's current global Cut-Through enable state, per the description. Admins check this to confirm whether cut-through switching is active system-wide right now, which is the master switch that per-interface and per-priority cut-through settings depend on. For example, if per-priority cut-through settings seem to have no effect on latency, checking this global flag would reveal whether cut-through is even globally enabled at the moment.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.54.30
snmpwalk -v2c -c public <target> CISCOSB-rlInterfaces::rlCutThroughEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.54.30.1
snmpget -v2c -c public <target> CISCOSB-rlInterfaces::rlCutThroughEnable.1

Start monitoring Cisco Small Business switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCOSB-rlInterfaces::rlCutThroughEnable OID value, configure state conditions and alerts, and monitor any Cisco Small Business switch from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.6otherEnterprisesCISCO-SMI
1.3.6.1.4.1.9.6.1ciscoSBCISCO-SMI
1.3.6.1.4.1.9.6.1.101switch001CISCOSB-MIB
1.3.6.1.4.1.9.6.1.101.54rlIfInterfacesCISCOSB-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.6.1.101.54.30rlCutThroughEnableCISCOSB-rlInterfaces