CISCOSB-WeightedRandomTailDrop-MIB :: rlWeightedRandomTailDropStatusAfterReset

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCOSB-WeightedRandomTailDrop-MIB › rlWeightedRandomTailDropStatusAfterReset

rlWeightedRandomTailDropStatusAfterReset

Module: CISCOSB-WeightedRandomTailDrop-MIB

OID (symbolic): CISCOSB-WeightedRandomTailDrop-MIB::rlWeightedRandomTailDropStatusAfterReset

OID (numeric): 1.3.6.1.4.1.9.6.1.101.146.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Set the Weighted Random Tail Drop status after reset

What is rlWeightedRandomTailDropStatusAfterReset?

This read-write enumerated value configures whether Weighted Random Tail Drop congestion control will be enabled or disabled the next time the device reboots. An administrator sets this so the WRTD feature's state persists as intended across a power cycle or reset, rather than reverting to a factory default. For instance, before scheduling a maintenance reboot, an admin sets rlWeightedRandomTailDropStatusAfterReset to enable so tail-drop weighting stays active after the switch comes back up.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.146.2
snmpwalk -v2c -c public <target> CISCOSB-WeightedRandomTailDrop-MIB::rlWeightedRandomTailDropStatusAfterReset

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.146.2.1
snmpget -v2c -c public <target> CISCOSB-WeightedRandomTailDrop-MIB::rlWeightedRandomTailDropStatusAfterReset.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.6.1.101.146.2.1 i <value>

Start monitoring Cisco Small Business switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCOSB-WeightedRandomTailDrop-MIB::rlWeightedRandomTailDropStatusAfterReset OID value, configure state conditions and alerts, and monitor any Cisco Small Business switches from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.6otherEnterprisesCISCO-SMI
1.3.6.1.4.1.9.6.1ciscoSBCISCO-SMI
1.3.6.1.4.1.9.6.1.101switch001CISCOSB-MIB
1.3.6.1.4.1.9.6.1.101.146rlWeightedRandomTailDropCISCOSB-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.6.1.101.146.2rlWeightedRandomTailDropStatusAfterResetCISCOSB-WeightedRandomTailDrop-MIB