All MIBs › CISCOSB-VRRP › rlVrrpv3OperationsDefaultPrimaryIpAddr
rlVrrpv3OperationsDefaultPrimaryIpAddr
Module: CISCOSB-VRRP
OID (symbolic): CISCOSB-VRRP::rlVrrpv3OperationsDefaultPrimaryIpAddr
OID (numeric): 1.3.6.1.4.1.9.6.1.101.26.26.1.1.1
Node type: OBJECT-TYPE
Type: InetAddress
Access: read-only
Description: In the case where there are more than one IP Address (associated IP addresses) for a given `ifIndex', this object is used to specify the IP address that will become the vrrpv3OperationsMasterIpAddr', should the virtual router transition from backup state to master and no vrrpv3OperationsDefaultPrimaryIpAddr was configured.
What is rlVrrpv3OperationsDefaultPrimaryIpAddr?
This read-only InetAddress specifies, for an interface with more than one associated IP address, which specific address is designated to become the vrrpv3OperationsMasterIpAddr should the virtual router transition from backup to master. An admin cares because on a multi-address interface, this setting determines exactly which IP the virtual router will advertise as its master address during a failover, avoiding ambiguity. For example, on a VRRP interface backing up several associated addresses, an admin confirms this field points to the intended primary address before relying on failover behavior.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.26.26.1.1.1 snmpwalk -v2c -c public <target> CISCOSB-VRRP::rlVrrpv3OperationsDefaultPrimaryIpAddr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.26.26.1.1.1.1 snmpget -v2c -c public <target> CISCOSB-VRRP::rlVrrpv3OperationsDefaultPrimaryIpAddr.1
Start monitoring Cisco Small Business (SB/SG series) router/switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCOSB-VRRP::rlVrrpv3OperationsDefaultPrimaryIpAddr OID value, configure state conditions and alerts, and monitor any Cisco Small Business (SB/SG series) router/switch from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.6 | otherEnterprises | CISCO-SMI |
| 1.3.6.1.4.1.9.6.1 | ciscoSB | CISCO-SMI |
| 1.3.6.1.4.1.9.6.1.101 | switch001 | CISCOSB-MIB |
| 1.3.6.1.4.1.9.6.1.101.26 | ipSpec | CISCOSB-IP |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.6.1.101.26.26 | rlVrrp | CISCOSB-VRRP |
| 1.3.6.1.4.1.9.6.1.101.26.26.1 | rlVrrpv3OperationsTable | CISCOSB-VRRP |
| 1.3.6.1.4.1.9.6.1.101.26.26.1.1 | rlVrrpv3OperationsEntry | CISCOSB-VRRP |
| 1.3.6.1.4.1.9.6.1.101.26.26.1.1.1 | rlVrrpv3OperationsDefaultPrimaryIpAddr | CISCOSB-VRRP |