CISCOSB-TRUNK-MIB :: rlDot3adAggLacpMembershipRestrictionsSpeedAdminMode

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCOSB-TRUNK-MIB › rlDot3adAggLacpMembershipRestrictionsSpeedAdminMode

rlDot3adAggLacpMembershipRestrictionsSpeedAdminMode

Module: CISCOSB-TRUNK-MIB

OID (symbolic): CISCOSB-TRUNK-MIB::rlDot3adAggLacpMembershipRestrictionsSpeedAdminMode

OID (numeric): 1.3.6.1.4.1.9.6.1.101.65.10.1.2

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This variable specifies the required speed of the LACP aggregator in bits per second. A value of 10 is returned for 10G. A value of 0 is returned if the value of the variable hasn't been set.

What is rlDot3adAggLacpMembershipRestrictionsSpeedAdminMode?

This read-write Unsigned32 specifies the required link speed, in bits per second, that the remote LACP aggregator's ports must operate at to be accepted into this trunk. An admin uses this to prevent slower or mismatched-speed links from accidentally joining a trunk meant to consist entirely of, say, 10G member ports. For example, setting this to 10 (for 10G) would cause the device to reject membership from a partner port negotiated at a lower speed.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.65.10.1.2
snmpwalk -v2c -c public <target> CISCOSB-TRUNK-MIB::rlDot3adAggLacpMembershipRestrictionsSpeedAdminMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.65.10.1.2.1
snmpget -v2c -c public <target> CISCOSB-TRUNK-MIB::rlDot3adAggLacpMembershipRestrictionsSpeedAdminMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.6.1.101.65.10.1.2.1 i <value>

Start monitoring Cisco Small Business managed switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCOSB-TRUNK-MIB::rlDot3adAggLacpMembershipRestrictionsSpeedAdminMode OID value, configure state conditions and alerts, and monitor any Cisco Small Business managed switch from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.6otherEnterprisesCISCO-SMI
1.3.6.1.4.1.9.6.1ciscoSBCISCO-SMI
1.3.6.1.4.1.9.6.1.101switch001CISCOSB-MIB
1.3.6.1.4.1.9.6.1.101.65rlDot3adAggCISCOSB-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.6.1.101.65.10rlDot3adAggLacpMembershipRestrictionsTableCISCOSB-TRUNK-MIB
1.3.6.1.4.1.9.6.1.101.65.10.1rlDot3adAggLacpMembershipRestrictionsEntryCISCOSB-TRUNK-MIB
1.3.6.1.4.1.9.6.1.101.65.10.1.2rlDot3adAggLacpMembershipRestrictionsSpeedAdminModeCISCOSB-TRUNK-MIB