All MIBs › CISCOSB-SSL › rlSslCertificateSave
rlSslCertificateSave
Module: CISCOSB-SSL
OID (symbolic): CISCOSB-SSL::rlSslCertificateSave
OID (numeric): 1.3.6.1.4.1.9.6.1.101.100.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Saves data from rlSslCertificateImportTable to RAM and CDB. When an external certificate should be copied to the device first we copy it to rlSslCertificateImportTable and then this scalar is set to the certificate id that we want to save - 1. All entries in rlSslCertificateImportTable that have this id and their format is equal to the current value of rlSslCertificateSaveFormat are concatenated. 2. If the imported certificate format is .. - section 1 result is validated against the key with the same index. If validation fails for any reason - the certificate is not saved and the setting this scalar fails.] This scalar is for certificate 1 only... for certificate 2 use rlSslCertificateSave2
What is rlSslCertificateSave?
This read-write INTEGER, when set to a certificate ID, tells the device to concatenate all matching entries in rlSslCertificateImportTable whose format matches rlSslCertificateSaveFormat and commit them from RAM into persistent CDB storage as that certificate. Admins use it as the final commit step after uploading a certificate's fragments into the import table, since without this write the imported data stays only staged rather than saved. For example, after uploading all fragments of an externally issued certificate meant for slot 2, an admin sets this scalar to 2 to finalize saving it to flash.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.100.3 snmpwalk -v2c -c public <target> CISCOSB-SSL::rlSslCertificateSave
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.100.3.1 snmpget -v2c -c public <target> CISCOSB-SSL::rlSslCertificateSave.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.6.1.101.100.3.1 i <value>
Start monitoring Cisco Small Business managed switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCOSB-SSL::rlSslCertificateSave OID value, configure state conditions and alerts, and monitor any Cisco Small Business managed switch from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.6 | otherEnterprises | CISCO-SMI |
| 1.3.6.1.4.1.9.6.1 | ciscoSB | CISCO-SMI |
| 1.3.6.1.4.1.9.6.1.101 | switch001 | CISCOSB-MIB |
| 1.3.6.1.4.1.9.6.1.101.100 | rlSsl | CISCOSB-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.6.1.101.100.3 | rlSslCertificateSave | CISCOSB-SSL |