All MIBs › CISCOSB-IP › rsIpAdEntPrecedence
rsIpAdEntPrecedence
Module: CISCOSB-IP
OID (symbolic): CISCOSB-IP::rsIpAdEntPrecedence
OID (numeric): 1.3.6.1.4.1.9.6.1.101.26.1.1.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
The IP preference, to be selected as source IP for rsIpAdEntIfIndex. this source IP selection is first by preference value. if more than one IP has the same preference the one with the lowest IP is selected. (higher value -> higher preference)
What is rsIpAdEntPrecedence?
This OID stores a preference number (higher value = higher priority) for selecting a source IP when the device sends traffic. The device picks the IP with the highest preference; if tied, it uses the lowest IP numerically. Admins set this to control which interface address the device uses for outgoing management traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.26.1.1.13 snmpwalk -v2c -c public <target> CISCOSB-IP::rsIpAdEntPrecedence
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.26.1.1.13.1 snmpget -v2c -c public <target> CISCOSB-IP::rsIpAdEntPrecedence.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.6.1.101.26.1.1.13.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.9 | cisco | CISCO-SMI |
| 1.3.6.1.4.1.9.6 | ciscoPartnerProducts | CISCO-SMI |
| 1.3.6.1.4.1.9.6.1.101 | switch001 | CISCOSB-MIB |
| 1.3.6.1.4.1.9.6.1.101.26 | ipSpec | CISCOSB-IP |
| 1.3.6.1.4.1.9.6.1.101.26.1 | rsIpAddrTable | CISCOSB-IP |
| 1.3.6.1.4.1.9.6.1.101.26.1.1 | rsIpAddrEntry | CISCOSB-IP |
| 1.3.6.1.4.1.9.6.1.101.26.1.1.13 | rsIpAdEntPrecedence | CISCOSB-IP |