CISCOSB-BRIDGE-SECURITY :: rlIpSourceGuardPermittedRuleCounterNumOfDhcpRules

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCOSB-BRIDGE-SECURITYrlIpSourceGuardPermittedRuleCounterNumOfDhcpRules

rlIpSourceGuardPermittedRuleCounterNumOfDhcpRules

Module: CISCOSB-BRIDGE-SECURITY

OID (symbolic): CISCOSB-BRIDGE-SECURITY::rlIpSourceGuardPermittedRuleCounterNumOfDhcpRules

OID (numeric): 1.3.6.1.4.1.9.6.1.101.112.2.7.1.3

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: Number of rules added by IP Source Guard for the permitted Hosts, as a result of DHCP Snooping dynamic information.

What is rlIpSourceGuardPermittedRuleCounterNumOfDhcpRules?

This read-only Counter32 counts the number of permit rules IP Source Guard has added for hosts based on dynamic information learned from DHCP Snooping. An admin cares because it shows how many devices are currently being protected purely through automatic DHCP-learned bindings rather than manual configuration. For example, an admin comparing this counter against the total number of active DHCP clients would use it to sanity-check that DHCP snooping is successfully feeding IP Source Guard for most connected devices.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.112.2.7.1.3
snmpwalk -v2c -c public <target> CISCOSB-BRIDGE-SECURITY::rlIpSourceGuardPermittedRuleCounterNumOfDhcpRules

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.112.2.7.1.3.1
snmpget -v2c -c public <target> CISCOSB-BRIDGE-SECURITY::rlIpSourceGuardPermittedRuleCounterNumOfDhcpRules.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> rlIpSourceGuardPermittedRuleCounterNumOfDhcpRules.1

Start monitoring Cisco Small Business managed switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCOSB-BRIDGE-SECURITY::rlIpSourceGuardPermittedRuleCounterNumOfDhcpRules OID value, configure state conditions and alerts, and monitor any Cisco Small Business managed switch from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.6otherEnterprisesCISCO-SMI
1.3.6.1.4.1.9.6.1ciscoSBCISCO-SMI
1.3.6.1.4.1.9.6.1.101switch001CISCOSB-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.6.1.101.112rlBridgeSecurityCISCOSB-BRIDGE-SECURITY
1.3.6.1.4.1.9.6.1.101.112.2rlIpSourceGuardCISCOSB-BRIDGE-SECURITY
1.3.6.1.4.1.9.6.1.101.112.2.7rlIpSourceGuardPermittedRuleCounterTableCISCOSB-BRIDGE-SECURITY
1.3.6.1.4.1.9.6.1.101.112.2.7.1rlIpSourceGuardPermittedRuleCounterEntryCISCOSB-BRIDGE-SECURITY
1.3.6.1.4.1.9.6.1.101.112.2.7.1.3rlIpSourceGuardPermittedRuleCounterNumOfDhcpRulesCISCOSB-BRIDGE-SECURITY