CISCOSB-BRIDGE-SECURITY :: rlIpDhcpSnoopFileUpdateTime

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCOSB-BRIDGE-SECURITYrlIpDhcpSnoopFileUpdateTime

rlIpDhcpSnoopFileUpdateTime

Module: CISCOSB-BRIDGE-SECURITY

OID (symbolic): CISCOSB-BRIDGE-SECURITY::rlIpDhcpSnoopFileUpdateTime

OID (numeric): 1.3.6.1.4.1.9.6.1.101.112.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Configures in seconds the period of time between file updates. The valid range is 600 - 86400.

What is rlIpDhcpSnoopFileUpdateTime?

This read-write INTEGER (600-86400 seconds) configures how often the DHCP snooping binding database file is updated on disk. An admin cares because it balances how current the saved binding file stays against the overhead of frequent file writes to flash storage. For example, an admin worried about flash wear on a switch with a heavily churning DHCP client population might set this value toward the higher end of the range, such as 3600 seconds, rather than the minimum 600.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.112.1.5
snmpwalk -v2c -c public <target> CISCOSB-BRIDGE-SECURITY::rlIpDhcpSnoopFileUpdateTime

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.112.1.5.1
snmpget -v2c -c public <target> CISCOSB-BRIDGE-SECURITY::rlIpDhcpSnoopFileUpdateTime.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.6.1.101.112.1.5.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> rlIpDhcpSnoopFileUpdateTime.1

Start monitoring Cisco Small Business managed switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCOSB-BRIDGE-SECURITY::rlIpDhcpSnoopFileUpdateTime OID value, configure state conditions and alerts, and monitor any Cisco Small Business managed switch from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.6otherEnterprisesCISCO-SMI
1.3.6.1.4.1.9.6.1ciscoSBCISCO-SMI
1.3.6.1.4.1.9.6.1.101switch001CISCOSB-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.6.1.101.112rlBridgeSecurityCISCOSB-BRIDGE-SECURITY
1.3.6.1.4.1.9.6.1.101.112.1rlIpDhcpSnoopCISCOSB-BRIDGE-SECURITY
1.3.6.1.4.1.9.6.1.101.112.1.5rlIpDhcpSnoopFileUpdateTimeCISCOSB-BRIDGE-SECURITY