CISCOSB-BRIDGE-SECURITY :: rlIpArpInspectEnableVlanRowStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCOSB-BRIDGE-SECURITYrlIpArpInspectEnableVlanRowStatus

rlIpArpInspectEnableVlanRowStatus

Module: CISCOSB-BRIDGE-SECURITY

OID (symbolic): CISCOSB-BRIDGE-SECURITY::rlIpArpInspectEnableVlanRowStatus

OID (numeric): 1.3.6.1.4.1.9.6.1.101.112.3.6.1.3

Node type: OBJECT-TYPE

Type: RowStatus

Access: read-write

Description: Entry status. A valid status is CreateandGo and Delete.

What is rlIpArpInspectEnableVlanRowStatus?

This read-write RowStatus (valid values CreateAndGo and Delete) controls enabling ARP Inspection on a specific VLAN by creating or deleting that VLAN's entry in the ARP inspection VLAN-enable table. An admin cares because ARP inspection is applied per VLAN, so this is the actual control for turning the feature on for one VLAN without affecting others. For example, an admin wanting ARP inspection active only on user-facing VLANs would use this object to create enable entries for just those VLANs.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.112.3.6.1.3
snmpwalk -v2c -c public <target> CISCOSB-BRIDGE-SECURITY::rlIpArpInspectEnableVlanRowStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.112.3.6.1.3.1
snmpget -v2c -c public <target> CISCOSB-BRIDGE-SECURITY::rlIpArpInspectEnableVlanRowStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.6.1.101.112.3.6.1.3.1 s <value>

Start monitoring Cisco Small Business managed switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCOSB-BRIDGE-SECURITY::rlIpArpInspectEnableVlanRowStatus OID value, configure state conditions and alerts, and monitor any Cisco Small Business managed switch from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.6otherEnterprisesCISCO-SMI
1.3.6.1.4.1.9.6.1ciscoSBCISCO-SMI
1.3.6.1.4.1.9.6.1.101switch001CISCOSB-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.6.1.101.112rlBridgeSecurityCISCOSB-BRIDGE-SECURITY
1.3.6.1.4.1.9.6.1.101.112.3rlIpArpInspectCISCOSB-BRIDGE-SECURITY
1.3.6.1.4.1.9.6.1.101.112.3.6rlIpArpInspectEnableVlanTableCISCOSB-BRIDGE-SECURITY
1.3.6.1.4.1.9.6.1.101.112.3.6.1rlIpArpInspectEnableVlanEntryCISCOSB-BRIDGE-SECURITY
1.3.6.1.4.1.9.6.1.101.112.3.6.1.3rlIpArpInspectEnableVlanRowStatusCISCOSB-BRIDGE-SECURITY