CISCOSB-BRIDGE-SECURITY :: rlIpArpInspectClearCountersAction

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCOSB-BRIDGE-SECURITYrlIpArpInspectClearCountersAction

rlIpArpInspectClearCountersAction

Module: CISCOSB-BRIDGE-SECURITY

OID (symbolic): CISCOSB-BRIDGE-SECURITY::rlIpArpInspectClearCountersAction

OID (numeric): 1.3.6.1.4.1.9.6.1.101.112.3.8

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: If true, clear (set to zero) on all vlans: all Arp Inspection counters: rlIpArpInspectVlanNumOfArpForwarded , rlIpArpInspectVlanNumOfArpDropped and rlIpArpInspectVlanNumOfArpMismatched

What is rlIpArpInspectClearCountersAction?

This read-write TruthValue, when set to true, clears (zeroes) the forwarded, dropped, and mismatched ARP inspection counters across all VLANs on the device at once. An admin cares because it gives a device-wide reset in one action rather than clearing each VLAN's counters individually. For example, an admin who just completed a broad network change affecting ARP behavior on many VLANs would set this true to reset all ARP inspection counters simultaneously before monitoring for new issues.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.112.3.8
snmpwalk -v2c -c public <target> CISCOSB-BRIDGE-SECURITY::rlIpArpInspectClearCountersAction

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.112.3.8.1
snmpget -v2c -c public <target> CISCOSB-BRIDGE-SECURITY::rlIpArpInspectClearCountersAction.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.6.1.101.112.3.8.1 s <value>

Start monitoring Cisco Small Business managed switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCOSB-BRIDGE-SECURITY::rlIpArpInspectClearCountersAction OID value, configure state conditions and alerts, and monitor any Cisco Small Business managed switch from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.6otherEnterprisesCISCO-SMI
1.3.6.1.4.1.9.6.1ciscoSBCISCO-SMI
1.3.6.1.4.1.9.6.1.101switch001CISCOSB-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.6.1.101.112rlBridgeSecurityCISCOSB-BRIDGE-SECURITY
1.3.6.1.4.1.9.6.1.101.112.3rlIpArpInspectCISCOSB-BRIDGE-SECURITY
1.3.6.1.4.1.9.6.1.101.112.3.8rlIpArpInspectClearCountersActionCISCOSB-BRIDGE-SECURITY