CISCOSB-BRGMACSWITCH-MIB :: rlBrgMacSwTrapEnable

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCOSB-BRGMACSWITCH-MIB › rlBrgMacSwTrapEnable

rlBrgMacSwTrapEnable

Module: CISCOSB-BRGMACSWITCH-MIB

OID (symbolic): CISCOSB-BRGMACSWITCH-MIB::rlBrgMacSwTrapEnable

OID (numeric): 1.3.6.1.4.1.9.6.1.101.50.10

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: This variable indicates whether to create a SNMP trap if adding dynamic mac failed due to full hash chain.

What is rlBrgMacSwTrapEnable?

This read-write TruthValue controls whether the device generates an SNMP trap when adding a dynamic MAC address entry fails because its hash chain is full. An admin cares because this failure means new devices on that segment may not be learned properly, and the trap is the proactive alert mechanism for it. For example, an admin managing a heavily loaded access switch would enable this trap so they're notified immediately if MAC learning starts failing due to hash-chain exhaustion, rather than only discovering it later via unreachable hosts.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.50.10
snmpwalk -v2c -c public <target> CISCOSB-BRGMACSWITCH-MIB::rlBrgMacSwTrapEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.50.10.1
snmpget -v2c -c public <target> CISCOSB-BRGMACSWITCH-MIB::rlBrgMacSwTrapEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.6.1.101.50.10.1 s <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> rlBrgMacSwTrapEnable.1

Start monitoring Cisco Small Business managed switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCOSB-BRGMACSWITCH-MIB::rlBrgMacSwTrapEnable OID value, configure state conditions and alerts, and monitor any Cisco Small Business managed switch from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.6otherEnterprisesCISCO-SMI
1.3.6.1.4.1.9.6.1ciscoSBCISCO-SMI
1.3.6.1.4.1.9.6.1.101switch001CISCOSB-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.6.1.101.50rlBrgMacSwitchCISCOSB-BRGMACSWITCH-MIB
1.3.6.1.4.1.9.6.1.101.50.10rlBrgMacSwTrapEnableCISCOSB-BRGMACSWITCH-MIB