All MIBs › CISCOSB-BRGMACSWITCH-MIB › rlBrgMacSwOldEntryDeleteMode
rlBrgMacSwOldEntryDeleteMode
Module: CISCOSB-BRGMACSWITCH-MIB
OID (symbolic): CISCOSB-BRGMACSWITCH-MIB::rlBrgMacSwOldEntryDeleteMode
OID (numeric): 1.3.6.1.4.1.9.6.1.101.50.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The method used to delete old unused entries refresh_flag: The high level sets a flag when it adds or updates an entry, the Switch clears the flag each time, when it learns the station once more. aging_flag: The high level clears a flag when it adds or updates an entry, the Switch sets the flag each time, when it learns the station once more. aging_time: The high level defines a timeout, the Switch sends a message to the high level each time when the station doesn't send messages during interval between timeout and 2*timeout. Boundaries: The Switch doesn't support any mechanism, and the high level uses two boundaries: red and yellow. When the number of entries exceeds the red boundary, the high level deletes the oldest entries.
What is rlBrgMacSwOldEntryDeleteMode?
This read-only INTEGER (refreshFlag(1), agingFlag(2), agingTime(3), boundaries(4)) reports which method the device uses to purge stale, no-longer-seen MAC address entries from its table. An admin cares because it explains the underlying mechanism behind MAC table entries disappearing, which affects how quickly moved or disconnected devices' entries clear out. For example, an admin troubleshooting a MAC table that still shows a decommissioned device would check this field to understand whether the entry is waiting on a flag-based refresh cycle or a fixed aging timer to be cleared.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.50.5 snmpwalk -v2c -c public <target> CISCOSB-BRGMACSWITCH-MIB::rlBrgMacSwOldEntryDeleteMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.50.5.1 snmpget -v2c -c public <target> CISCOSB-BRGMACSWITCH-MIB::rlBrgMacSwOldEntryDeleteMode.1
Start monitoring Cisco Small Business managed switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCOSB-BRGMACSWITCH-MIB::rlBrgMacSwOldEntryDeleteMode OID value, configure state conditions and alerts, and monitor any Cisco Small Business managed switch from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.6 | otherEnterprises | CISCO-SMI |
| 1.3.6.1.4.1.9.6.1 | ciscoSB | CISCO-SMI |
| 1.3.6.1.4.1.9.6.1.101 | switch001 | CISCOSB-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.6.1.101.50 | rlBrgMacSwitch | CISCOSB-BRGMACSWITCH-MIB |
| 1.3.6.1.4.1.9.6.1.101.50.5 | rlBrgMacSwOldEntryDeleteMode | CISCOSB-BRGMACSWITCH-MIB |