All MIBs › CISCO-XDSL-LINE-MIB › cXdslTestType
cXdslTestType
Module: CISCO-XDSL-LINE-MIB
OID (symbolic): CISCO-XDSL-LINE-MIB::cXdslTestType
OID (numeric): 1.3.6.1.4.1.9.9.204.1.2.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The type of test to be performed. The test duration is determined by cXdslTestTime. All the test types inhibit the service on that line. The agent will only change cXdslTestType, if no test is active on the targeted port. The XTU-C may support other test types that are not defined in this mib, if such test is running this object will have a value of 'other'. cXdslTestTrigger will start the test when set to start.
What is cXdslTestType?
This read-write object selects which type of BERT (bit error rate test) to run on this DSL port, such as digital or analog, local or remote, and the desc warns that every test type inhibits normal service on that line for its duration. It also notes the agent will refuse to change this while a test is already active on that port. For example, an admin scheduling a maintenance test on a subscriber's DSL line would set cXdslTestType to bertDigitalRemote and warn the customer of a service interruption before triggering the test.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.204.1.2.1.2 snmpwalk -v2c -c public <target> CISCO-XDSL-LINE-MIB::cXdslTestType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.204.1.2.1.2.1 snmpget -v2c -c public <target> CISCO-XDSL-LINE-MIB::cXdslTestType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.204.1.2.1.2.1 i <value>
Start monitoring Cisco routers/DSLAMs (xDSL line cards) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-XDSL-LINE-MIB::cXdslTestType OID value, configure state conditions and alerts, and monitor any Cisco routers/DSLAMs (xDSL line cards) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.204 | ciscoXdslLineMIB | CISCO-XDSL-LINE-MIB |
| 1.3.6.1.4.1.9.9.204.1 | ciscoXdslLineMIBObjects | CISCO-XDSL-LINE-MIB |
| 1.3.6.1.4.1.9.9.204.1.2 | cXdslTestTable | CISCO-XDSL-LINE-MIB |
| 1.3.6.1.4.1.9.9.204.1.2.1 | cXdslTestEntry | CISCO-XDSL-LINE-MIB |
| 1.3.6.1.4.1.9.9.204.1.2.1.2 | cXdslTestType | CISCO-XDSL-LINE-MIB |