All MIBs › CISCO-XDSL-LINE-MIB › cXdslTestBertErrors
cXdslTestBertErrors
Module: CISCO-XDSL-LINE-MIB
OID (symbolic): CISCO-XDSL-LINE-MIB::cXdslTestBertErrors
OID (numeric): 1.3.6.1.4.1.9.9.204.1.2.1.5
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: Errors during BERT test.
The test will abort if any BERT errors occur.
Note: that even if there are no BERT errors the test can
still fail due to BertBitErrors.
Bit Description
--- -----------
0 No BERT errors
1 XTU-R BERT aborted
2 XTU-R lost sync during BERT
3 XTU-R never got in sync
4 No XTU-R BERT results
5 XTU-C BERT aborted
6 XTU-C lost sync during BERT
7 XTU-C never got in syncWhat is cXdslTestBertErrors?
This read-only BITS object reports which specific error conditions occurred during a BERT test, such as the CPE losing sync or the test aborting outright, and the desc notes the test itself aborts if any of these bits are set. It also cautions that a test can still fail via cXdslTestBertBitErrors even when this object shows no bits set. For example, an admin seeing a BERT test marked failed but cXdslTestBertErrors showing noError(0) would know to check cXdslTestBertBitErrors instead, since the failure came from actual bit errors rather than a sync or abort condition.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.204.1.2.1.5 snmpwalk -v2c -c public <target> CISCO-XDSL-LINE-MIB::cXdslTestBertErrors
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.204.1.2.1.5.1 snmpget -v2c -c public <target> CISCO-XDSL-LINE-MIB::cXdslTestBertErrors.1
Start monitoring Cisco routers/DSLAMs (xDSL line cards) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-XDSL-LINE-MIB::cXdslTestBertErrors OID value, configure state conditions and alerts, and monitor any Cisco routers/DSLAMs (xDSL line cards) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.204 | ciscoXdslLineMIB | CISCO-XDSL-LINE-MIB |
| 1.3.6.1.4.1.9.9.204.1 | ciscoXdslLineMIBObjects | CISCO-XDSL-LINE-MIB |
| 1.3.6.1.4.1.9.9.204.1.2 | cXdslTestTable | CISCO-XDSL-LINE-MIB |
| 1.3.6.1.4.1.9.9.204.1.2.1 | cXdslTestEntry | CISCO-XDSL-LINE-MIB |
| 1.3.6.1.4.1.9.9.204.1.2.1.5 | cXdslTestBertErrors | CISCO-XDSL-LINE-MIB |