CISCO-WIRELESS-P2P-BPI-MIB :: cwrBpiRsAuthReset

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WIRELESS-P2P-BPI-MIBcwrBpiRsAuthReset

cwrBpiRsAuthReset

Module: CISCO-WIRELESS-P2P-BPI-MIB

OID (symbolic): CISCO-WIRELESS-P2P-BPI-MIB::cwrBpiRsAuthReset

OID (numeric): 1.3.6.1.4.1.9.9.135.1.1.1.1.6

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: Setting this object to TRUE generates a Reauthorize event in the authorization FSM, as described in section 4.1.2.3.4 of the Baseline Privacy Interface Specification. Reading this object always returns FALSE.

What is cwrBpiRsAuthReset?

This read-write object, when set to true, forces a Reauthorize event in the Radio Slave's authorization FSM as defined by the Baseline Privacy Interface specification, though reading it back always returns false since it's a momentary trigger rather than a stored state. An admin uses this to manually force a slave radio to renegotiate its authorization, for example after suspecting a compromised key. For example, if an admin suspects a radio slave's authorization key may have been exposed, setting cwrBpiRsAuthReset to true immediately forces that slave to reauthorize with a fresh key.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.135.1.1.1.1.6
snmpwalk -v2c -c public <target> CISCO-WIRELESS-P2P-BPI-MIB::cwrBpiRsAuthReset

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.135.1.1.1.1.6.1
snmpget -v2c -c public <target> CISCO-WIRELESS-P2P-BPI-MIB::cwrBpiRsAuthReset.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.135.1.1.1.1.6.1 s <value>

Start monitoring Cisco point-to-point wireless bridge/backhaul radio (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-P2P-BPI-MIB::cwrBpiRsAuthReset OID value, configure state conditions and alerts, and monitor any Cisco point-to-point wireless bridge/backhaul radio (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.135ciscoWirelessP2pBpiMIBCISCO-WIRELESS-P2P-BPI-MIB
1.3.6.1.4.1.9.9.135.1cwrBpiMIBObjectsCISCO-WIRELESS-P2P-BPI-MIB
1.3.6.1.4.1.9.9.135.1.1cwrBpiRsObjectsCISCO-WIRELESS-P2P-BPI-MIB
1.3.6.1.4.1.9.9.135.1.1.1cwrBpiRsBaseTableCISCO-WIRELESS-P2P-BPI-MIB
1.3.6.1.4.1.9.9.135.1.1.1.1cwrBpiRsBaseEntryCISCO-WIRELESS-P2P-BPI-MIB
1.3.6.1.4.1.9.9.135.1.1.1.1.6cwrBpiRsAuthResetCISCO-WIRELESS-P2P-BPI-MIB