All MIBs › CISCO-WIRELESS-P2P-BPI-MIB › cwrBpiRmTEKLifetime
cwrBpiRmTEKLifetime
Module: CISCO-WIRELESS-P2P-BPI-MIB
OID (symbolic): CISCO-WIRELESS-P2P-BPI-MIB::cwrBpiRmTEKLifetime
OID (numeric): 1.3.6.1.4.1.9.9.135.1.2.2.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Lifetime, in seconds, the Radio Master assigns to keys for this TEK association. NOTE: When installed in the field, this variable should NEVER be set below 1800 which is the lower limit by standard. This variable accepts a wider range to facilitate testing.
What is cwrBpiRmTEKLifetime?
This read-write object, in seconds within a 1-to-604800 range, sets how long the Radio Master assigns as the validity period for keys in a given TEK association. The desc cautions that field deployments should never set this below the standards-mandated 1800-second (30-minute) floor, with the wider range provided only to facilitate testing. For example, an admin configuring a production link would ensure cwrBpiRmTEKLifetime stays at or above 1800 seconds rather than using a shorter value intended for lab testing of rapid rekey behavior.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.135.1.2.2.1.2 snmpwalk -v2c -c public <target> CISCO-WIRELESS-P2P-BPI-MIB::cwrBpiRmTEKLifetime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.135.1.2.2.1.2.1 snmpget -v2c -c public <target> CISCO-WIRELESS-P2P-BPI-MIB::cwrBpiRmTEKLifetime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.135.1.2.2.1.2.1 i <value>
Start monitoring Cisco point-to-point wireless bridge/backhaul radio (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-P2P-BPI-MIB::cwrBpiRmTEKLifetime OID value, configure state conditions and alerts, and monitor any Cisco point-to-point wireless bridge/backhaul radio (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.135 | ciscoWirelessP2pBpiMIB | CISCO-WIRELESS-P2P-BPI-MIB |
| 1.3.6.1.4.1.9.9.135.1 | cwrBpiMIBObjects | CISCO-WIRELESS-P2P-BPI-MIB |
| 1.3.6.1.4.1.9.9.135.1.2 | cwrBpiRmObjects | CISCO-WIRELESS-P2P-BPI-MIB |
| 1.3.6.1.4.1.9.9.135.1.2.2 | cwrBpiRmTEKTable | CISCO-WIRELESS-P2P-BPI-MIB |
| 1.3.6.1.4.1.9.9.135.1.2.2.1 | cwrBpiRmTEKEntry | CISCO-WIRELESS-P2P-BPI-MIB |
| 1.3.6.1.4.1.9.9.135.1.2.2.1.2 | cwrBpiRmTEKLifetime | CISCO-WIRELESS-P2P-BPI-MIB |