All MIBs › CISCO-WIRELESS-P2P-BPI-MIB › cwrBpiRmAuthRsReset
cwrBpiRmAuthRsReset
Module: CISCO-WIRELESS-P2P-BPI-MIB
OID (symbolic): CISCO-WIRELESS-P2P-BPI-MIB::cwrBpiRmAuthRsReset
OID (numeric): 1.3.6.1.4.1.9.9.135.1.2.1.1.6
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: Setting this object to True(1) causes the Radio Master to invalidate the current Radio Slave authorization key, to transmit an Authorization Invalid message to the Radio Slave, and to invalidate the unicast TEK associated with this Radio Slave authorization. Reading this object always returns False
What is cwrBpiRmAuthRsReset?
This read-write object, when set to true, causes the Radio Master to immediately invalidate this Radio Slave's current authorization key, send it an Authorization Invalid message, and invalidate the associated unicast TEK, though reading the object back always returns false. An admin uses this from the master side to forcibly cut off and require re-authorization of a specific slave, for example one suspected of being compromised. For example, if a subscriber radio is suspected of unauthorized cloning, an admin could set cwrBpiRmAuthRsReset to true on the master to immediately revoke that slave's current keys and force it to reauthorize.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.135.1.2.1.1.6 snmpwalk -v2c -c public <target> CISCO-WIRELESS-P2P-BPI-MIB::cwrBpiRmAuthRsReset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.135.1.2.1.1.6.1 snmpget -v2c -c public <target> CISCO-WIRELESS-P2P-BPI-MIB::cwrBpiRmAuthRsReset.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.135.1.2.1.1.6.1 s <value>
Start monitoring Cisco point-to-point wireless bridge/backhaul radio (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-P2P-BPI-MIB::cwrBpiRmAuthRsReset OID value, configure state conditions and alerts, and monitor any Cisco point-to-point wireless bridge/backhaul radio (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.135 | ciscoWirelessP2pBpiMIB | CISCO-WIRELESS-P2P-BPI-MIB |
| 1.3.6.1.4.1.9.9.135.1 | cwrBpiMIBObjects | CISCO-WIRELESS-P2P-BPI-MIB |
| 1.3.6.1.4.1.9.9.135.1.2 | cwrBpiRmObjects | CISCO-WIRELESS-P2P-BPI-MIB |
| 1.3.6.1.4.1.9.9.135.1.2.1 | cwrBpiRmAuthTable | CISCO-WIRELESS-P2P-BPI-MIB |
| 1.3.6.1.4.1.9.9.135.1.2.1.1 | cwrBpiRmAuthEntry | CISCO-WIRELESS-P2P-BPI-MIB |
| 1.3.6.1.4.1.9.9.135.1.2.1.1.6 | cwrBpiRmAuthRsReset | CISCO-WIRELESS-P2P-BPI-MIB |