CISCO-WIRELESS-P2P-BPI-MIB :: cwrBpiRmAuthRsLifetime

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WIRELESS-P2P-BPI-MIBcwrBpiRmAuthRsLifetime

cwrBpiRmAuthRsLifetime

Module: CISCO-WIRELESS-P2P-BPI-MIB

OID (symbolic): CISCO-WIRELESS-P2P-BPI-MIB::cwrBpiRmAuthRsLifetime

OID (numeric): 1.3.6.1.4.1.9.9.135.1.2.1.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Lifetime, in seconds, the Radio Master assigns to an authorization key for this Radio Slave.

NOTE: When installed in the field, this variable should NEVER be set below 86400 which is the lower limit by standard. This variable accepts a wider range to facilitate testing.

What is cwrBpiRmAuthRsLifetime?

This read-write object, in seconds within a wide 1-to-6048000 range, sets how long an authorization key the Radio Master issues to this Radio Slave will remain valid before requiring renewal. The desc cautions that production deployments should never set this below the standards-mandated 86400-second (24-hour) floor, with the extended range meant only to facilitate testing. For example, an admin provisioning a live subscriber link would set cwrBpiRmAuthRsLifetime to at least 86400 seconds, reserving shorter test values for lab validation only.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.135.1.2.1.1.5
snmpwalk -v2c -c public <target> CISCO-WIRELESS-P2P-BPI-MIB::cwrBpiRmAuthRsLifetime

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.135.1.2.1.1.5.1
snmpget -v2c -c public <target> CISCO-WIRELESS-P2P-BPI-MIB::cwrBpiRmAuthRsLifetime.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.135.1.2.1.1.5.1 i <value>

Start monitoring Cisco point-to-point wireless bridge/backhaul radio (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-P2P-BPI-MIB::cwrBpiRmAuthRsLifetime OID value, configure state conditions and alerts, and monitor any Cisco point-to-point wireless bridge/backhaul radio (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.135ciscoWirelessP2pBpiMIBCISCO-WIRELESS-P2P-BPI-MIB
1.3.6.1.4.1.9.9.135.1cwrBpiMIBObjectsCISCO-WIRELESS-P2P-BPI-MIB
1.3.6.1.4.1.9.9.135.1.2cwrBpiRmObjectsCISCO-WIRELESS-P2P-BPI-MIB
1.3.6.1.4.1.9.9.135.1.2.1cwrBpiRmAuthTableCISCO-WIRELESS-P2P-BPI-MIB
1.3.6.1.4.1.9.9.135.1.2.1.1cwrBpiRmAuthEntryCISCO-WIRELESS-P2P-BPI-MIB
1.3.6.1.4.1.9.9.135.1.2.1.1.5cwrBpiRmAuthRsLifetimeCISCO-WIRELESS-P2P-BPI-MIB